Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Ebonite Rod: Rubber and an Equal Weight of Sulphur, Cured Hours in the Heat, Goodyear 1851
Mary

Nilikha ni

Mary

18. Oktubre 2026FI
16
0
0
0
0

Ebonite Rod: Rubber and an Equal Weight of Sulphur, Cured Hours in the Heat, Goodyear 1851

Ebonite is rubber with a great deal of sulphur. Nelson Goodyear's patent (1851) uses about equal weights of the two, far more than for soft rubber, moulded and then cured at 260–275 °F for three to six hours or longer. It comes out hard and stiff. The picture: ebonite objects (photo by FBQ, Wikimedia Commons, CC BY-SA 3.0).
Katamtaman
1 day

Mga Tagubilin

1

Weigh equal parts

Weigh the rubber and the sulphur, about equal parts by weight. Much less sulphur will not make it hard.

Mga materyales para sa hakbang na ito:

Pinausukang plantsa ng gomaPinausukang plantsa ng goma500 g
Pulbos na asuprePulbos na asupre500 g

Mga kailangang kasangkapan:

Timbangang panimbangTimbangang panimbang
2

Work the sulphur in

Mix the sulphur into the rubber the usual way rubber is compounded: on the rubber mill, until the sulphur is spread evenly through.

Mga kailangang kasangkapan:

Two-roll na gilingan ng gomaTwo-roll na gilingan ng goma
3

Mould the rod

Press the compound firmly into a tube to shape it as a rod.

Mga kailangang kasangkapan:

Tubong asero na 12 mmTubong asero na 12 mm
4

Cure it

Heat it to 260–275 °F (about 127–135 °C) and hold it there three to six hours, or longer. Let it cool and push out the hard rod.

Mga kailangang kasangkapan:

HurnoHurno
TermometroTermometro

Mga Materyales

2

Mga Kinakailangang Kasangkapan

5

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...