Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Youblob · CC0
Elastic Cord: Cotton Braided over a Stretched Rubber Strand (Blakesley 1889)
Braid cotton round a rubber strand while the rubber is stretched, and the cord springs back when it is let go. Gilbert Blakesley of Bristol, Connecticut set the stretch so that the braid stops the cord before the rubber is pulled past the point it fully recovers from, and so that at rest the rubber carries no tension at all. The braid protects the rubber and it lasts.
Source: G. H. Blakesley, US 411,416 (1889). The rubber strand is our rubber thread blueprint; the tools are ours. Picture drawn by Youblob.
Katamtaman
2 hours
Mga Tagubilin
1
1
Feed the rubber under tension
Feed the rubber under tension
Pass a long rubber strand, or several, under tension through a braiding machine. Round or flat, one strand or more: Blakesley says it does not matter.
Mga materyales para sa hakbang na ito:
Sinulid na goma1 as requiredMga kailangang kasangkapan:
Makinang pantirintas2
2
Braid on a cotton cover
Braid on a cotton cover
Let the machine braid a covering of cotton thread over the stretched rubber with a rapid feed.
Mga materyales para sa hakbang na ito:
Sinulid na Bulak1 as requiredMga kailangang kasangkapan:
Makinang pantirintas3
3
Set tension against feed
Set tension against feed
Adjust the rubber tension and the braider feed so that, when the cord is pulled, the braid reaches its full length before the rubber reaches its safe stretch, the stretch it fully recovers from without risk of breaking. At rest, the rubber should be under no tension at all.
Mga kailangang kasangkapan:
Makinang pantirintas
Ruler4
4
Optional soft second cover
Optional soft second cover
For a softer cord, pass it again, under tension, through a braider that lays a loose second covering of soft thread such as silk or wool.
Mga materyales para sa hakbang na ito:
Sinulid na sutla1 as requiredMga kailangang kasangkapan:
Makinang pantirintas5
5
Reel it
Reel it
Wind the cord on a reel as it leaves the braider.
Mga kailangang kasangkapan:
Set ng ikiran ng sinulidMga Materyales
3- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.