SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Electric Hot Plate with a Cast-In Element: Jordan & Schneider, 1935
In a cast cooking plate the heating coils sit, insulated, inside tubes, and the tubes are cast into the plate. Friedrich Jordan and Paul Schneider of Voigt & Haeffner, Frankfurt, patented a better way in 1935, US 1,998,764: embed each tube only to about half its circumference, or a little more. Casting metal round the whole tube needs core models, costs material and spreads the heat unevenly, while the exposed underside loses little heat because air conducts far worse than metal. To hold the coil firmly while the iron is poured, holding strips or notched webs are fixed to its turns and cast into the plate with it. The centre of the plate may be made thicker to even out the heat.
Abantado
Foundry process
Mga Tagubilin
1
1
Coil the element
Coil the element
Coil the tubular heating element, the heating wire inside an insulated tube, into a spiral.
Mga materyales para sa hakbang na ito:
Elementong pampainit1 piraso2
2
Fix holding strips
Fix holding strips
Weld holding strips of sheet metal or wire across the turns of the spiral, or slide the turns into notched webs and bend the webs' tongues round them so they cannot come loose during casting.
Mga materyales para sa hakbang na ito:
Mga pirasong panghawak ng elemento1 as requiredMga kailangang kasangkapan:
Makinang panghinang na arko
Plais na Kombinasyon3
3
Cast the plate
Cast the plate
Set the coil in the mould and cast the cooking plate in cast iron, so the tubes are embedded to about half their circumference, or a little more, and the strips or webs are cast in with them. The rest of each tube stays exposed on the underside. The plate may be made thicker at the centre.
Mga materyales para sa hakbang na ito:
Mga tinunaw na bakal na hilaw1 as requiredMga kailangang kasangkapan:
Cupola furnace
Sandok ng pagbububo ng metalMga Materyales
3- 1 pirasoPlaceholder
- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
Mga Kinakailangang Kasangkapan
4- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.