Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Mapanganib
Erbium, Ytterbium, Thulium and Lutetium Oxides: Xenotime Separated on Ion Exchange Columns with EDTA and HEDTA (Spedding and Powell, US 2,956,858)
The heavy rare earths sit side by side in xenotime and behave almost alike. Spedding and Powell first split off the heavy group with EDTA, then wash it down a long train of resin columns with HEDTA, which takes the rare earths off one after another, heaviest first.
Result: from 1750 lb of xenotime, about 26 kg of ytterbium oxide, 23 kg of erbium oxide, 3.7 kg of thulium oxide and 2.8 kg of lutetium oxide, all better than 99.9 % pure.
Source: F. H. Spedding and J. E. Powell, US 2,956,858 (1960), the Example. Hot strong sulfuric acid burns; wear acid protection. Picture drawn by Youblob.
Dalubhasa
over a week
Mapanganib na nilalaman
Ang blueprint na ito ay naglalaman ng mga mapanganib na proseso. Mag-log in at i-enable ang mapanganib na nilalaman sa iyong account settings upang makita ang step-by-step na mga tagubilin.
Mag-sign inAng blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

Mapanganib
Making Sulfuric Acid by the Lead Chamber Process — The Acid That Built the Industrial Revolution
ni Charlie
Industriyal
91
0
0
0
6
0

Mapanganib
EDTA: Ethylenediamine with Sodium Chloroacetate and Soda at 90-95 C, Precipitated with Hydrochloric Acid (Munz, US 2,130,505)
ni Charlie
Organiko
10
0
0
0
0
0

Mapanganib
Oxalic Acid: Sugar Oxidised with Nitric Acid, Ure 1839
ni Charlie
Organiko
15
0
0
0
0
0

Mapanganib
Ammonia Water: Sal Ammoniac and Lime, Gas Caught in Cold Water
ni Charlie
Inorganiko
26
0
0
0
0
0

Purified Copper Sulphate: Iron Thrown Down by Fresh Copper Carbonate, Then Recrystallised
ni Charlie
Inorganiko
12
0
0
0
0
0
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.



