Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Expanded Perlite: Volcanic Glass Puffed in a Minute of Fierce Heat
Perlite is a volcanic glass with water locked inside. Heated fast into its softening range, the water turns to steam and puffs each grain up to 7–16 times its volume, brilliant white and light (Wikipedia). The U.S. Bureau of Mines (1946) found that grains up to ¼ inch need only 1 to 3 minutes at the right heat, somewhere between 1,600 and 2,600 °F depending on the ore.
The picture: expanded perlite (photo by KENPEI, Wikimedia Commons, CC BY-SA 3.0).
Katamtaman
A few hours
Mga Tagubilin
1
1
Crush and size
Crush and size
Break the perlite ore into grains no bigger than ¼ inch and sieve out the large pieces.
Mga materyales para sa hakbang na ito:
Batong Perlite1 kgMga kailangang kasangkapan:
Martilyong pankamay
Magaspang na bithay2
2
Heat it fast
Heat it fast
Heat the kiln first. Drop a thin layer of grains in on a hot dish for 1 to 3 minutes, then take them out. Slow heating does not work.
Mga kailangang kasangkapan:
Pugon
Mababaw na pinggan
Sipit na Mahaba ang Hawakan
Mga guwantes sa paghihinang3
3
Find your ore's heat
Find your ore's heat
Each ore has its own heat, between 1,600 and 2,600 °F. Too cool and it hardly puffs; hotter puffs it more. Too hot and it melts, lets the gas out, and shrinks back to dense slag. Test small lots first.
Mga kailangang kasangkapan:
PugonMababaw na pingganSipit na Mahaba ang Hawakan4
4
Float off the duds
Float off the duds
Tip the cooled grains into water. The expanded ones float; grains that did not expand sink. Skim the floaters off and dry them.
Mga kailangang kasangkapan:
Balde
TubigMga Materyales
1- 1 kgPlaceholder
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.