Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Ferrite Toroid Core: Copper-Zinc Ferrite Sintered at 1200 °C, Presintered Three Times at 900 °C (Snoek 1948, Ex. I)
A soft ferrite ring core for coils and transformers: copper, zinc and iron oxides with a little brownstone, presintered three times at 900 °C, pressed into a ring and sintered at 1200 °C in oxygen. Snoek's ring had an initial permeability of 1,000.
Source: J. L. Snoek, US 2,452,530 (Philips, 1948), Example I and its table. The violet iron oxide has its own blueprint (precipitated hematite calcined at 1000-1100 °C, after Nurdini et al. 2022); Snoek does not say how his was made. Picture: the patent's Fig. 4, the ring core.
Abantado
2 days
Mga Tagubilin
1
1
Weigh 20 : 30 : 50 mol % and 1 % brownstone
Weigh 20 : 30 : 50 mol % and 1 % brownstone
Mix 20 mol % pure copper oxide, 30 mol % pure zinc oxide and 50 mol % pure violet iron oxide, and add 1 % by weight of brownstone (manganese dioxide). Ours, by weight: 13.24 g copper oxide, 20.32 g zinc oxide and 66.44 g iron oxide per 100 g, plus 1 g brownstone. Snoek does not say what makes it 'violet'; violet iron oxide has its own blueprint.
Mga materyales para sa hakbang na ito:
Copper Oxide13.24 g
Pulbos ng Zinc Oxide20.32 g
Lilang iron oxide66.44 g
Manganese dioxide (pirolusita)1 gMga kailangang kasangkapan:
Timbangang panimbang
Maskara Laban sa Alikabok2
2
Grind half an hour in an iron ball mill
Grind half an hour in an iron ball mill
Grind the mixture for half an hour in a mill with iron balls.
Mga kailangang kasangkapan:
Gilingang Bolang BakalMaskara Laban sa Alikabok3
3
Presinter at 900 °C for 2 hours in oxygen
Presinter at 900 °C for 2 hours in oxygen
Heat the ground powder to 900 °C for 2 hours in oxygen and let it cool.
Mga kailangang kasangkapan:
Hurnong Tubo
Oksiheno
Tangke ng gas na may presyon
Pirometro
Krisol na may takip (porselana)
Guwantes na Matibay sa Init4
4
Grind and presinter at 900 °C again (2 of 3)
Grind and presinter at 900 °C again (2 of 3)
Grind the powder, then heat it once more to 900 °C in oxygen. Snoek gives no times for the repeats.
Mga kailangang kasangkapan:
Gilingang Bolang BakalHurnong TuboOksihenoTangke ng gas na may presyonKrisol na may takip (porselana)Guwantes na Matibay sa InitMaskara Laban sa Alikabok5
5
Grind and presinter at 900 °C again (3 of 3)
Grind and presinter at 900 °C again (3 of 3)
Grind the powder, then heat it once more to 900 °C in oxygen. Snoek gives no times for the repeats.
Mga kailangang kasangkapan:
Gilingang Bolang BakalHurnong TuboOksihenoTangke ng gas na may presyonKrisol na may takip (porselana)Guwantes na Matibay sa InitMaskara Laban sa Alikabok6
6
Grind 2 hours with iron balls
Grind 2 hours with iron balls
Grind it for 2 hours in a disintegrator with iron balls.
Mga kailangang kasangkapan:
Gilingang Bolang BakalMaskara Laban sa Alikabok7
7
Press a ring at 4 tons per cm²
Press a ring at 4 tons per cm²
Press the powder at 4 tons per square centimetre into a ring 3 cm across with a 4 × 4 mm cross-section.
Mga kailangang kasangkapan:
Haydroliko na pandiin
Dais na Pang-Press ng SingsingMaskara Laban sa Alikabok8
8
Sinter at 1200 °C in oxygen, cool 5–10 °C a minute
Sinter at 1200 °C in oxygen, cool 5–10 °C a minute
Sinter the ring at 1200 °C in a current of oxygen. Example I heats for 1 hour and cools in the oxygen at 5 to 10 °C per minute. Snoek's ring had an initial permeability of 1,000, measured at room temperature at 2 kHz.
Mga kailangang kasangkapan:
Hurnong TuboOksihenoTangke ng gas na may presyonPirometro
Sipit ng KrisolGuwantes na Matibay sa InitMga Materyales
4- 13.24 gPlaceholder
- 20.32 gPlaceholder
- 66.44 gPlaceholder
- Placeholder
Mga Kinakailangang Kasangkapan
12- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.