Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
File Card: Card Clothing Glued into a Recessed Wooden Handle (Nicholson, 1878)
Forge

Nilikha ni

Forge

5. Nobyembre 2026NO
6
0
0
0
0

File Card: Card Clothing Glued into a Recessed Wooden Handle (Nicholson, 1878)

A file card is a short wire brush for clearing the filings out of a file's teeth. In 1878 the Nicholson File Company described the usual home-made card, old card clothing tacked to a rough handle that often split and soon came loose, and sold a better one: new card clothing fixed in a recess in the handle with glue, so the glue holds the clothing by its edges as well as its bottom. Nicholson gives no sizes, no wood and no recess depth; those are unknown here. Source: W. T. Nicholson, A Treatise on Files and Rasps (Nicholson File Co., 1878), pp. 38-39, 73-74. Picture: Nicholson's plate, FILE CARD (p. 38).
Baguhan
An afternoon, plus a day for the glue

Mga Tagubilin

1

Read Nicholson

"The card clothing for these Cleaners is new, and firmly fastened to the handle (in a recess) with glue, which holds it upon its edges, as well as its bottom."
2

Shape the handle

Saw a flat wooden blank with a broad head and a handle at one end, and round the handle with the rasp. Nicholson's handle has a hole near its end to hang it up. The wood and the sizes are not given (unknown).

Mga materyales para sa hakbang na ito:

Tabla ng Matigas na KahoyTabla ng Matigas na Kahoy1 blank

Mga kailangang kasangkapan:

Lagaring PangkurbaLagaring Pangkurba
Kikil na magaspangKikil na magaspang
Hindi alam na sukatHindi alam na sukat
3

Cut the recess

Cut a shallow recess in the face of the head, the size of the piece of card clothing, with chisel and mallet, so its walls can grip the edges of the clothing. The depth is not given (unknown).

Mga kailangang kasangkapan:

Mga paitMga pait
Kahoy na PamukpokKahoy na Pamukpok
Hindi alam na sukatHindi alam na sukat
4

Glue in the card clothing

Cut new card clothing to fit the recess, teeth up. Spread hot glue over the bottom and walls of the recess, press the clothing in, and leave the glue to set, so it holds the clothing by its edges as well as its bottom.

Mga materyales para sa hakbang na ito:

Balot ng panuklay (card clothing)Balot ng panuklay (card clothing)1 piraso
Pandikit mula sa hayopPandikit mula sa hayop1 as required

Mga kailangang kasangkapan:

Gunting sa katadGunting sa katad
4

Using it

Clean a file at intervals while working and before it is put away: wood, horn and the like mix with oil in the teeth, bake hard when dry, and stop the teeth biting. Draw the card along the file to clear the filings. Pins stuck fast in the teeth are picked out with the soft-iron scorer, which is not built here.
6

History and honest limits

Nicholson patented these file cleaners on 12 February 1878 and sold them by the half dozen, alongside a File Brush that combines a brush, a card and a scorer for tool makers using fine files. The wood, the sizes and the recess depth are not given; a hardwood board stands for the handle wood. The scorer and its spring are not built here.

Mga Materyales

3

Mga Kinakailangang Kasangkapan

6

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...