Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Flat Harvesting Basket: the Willow 3-Peck Fruit Flat (Hasluck, 1903)
Woody

Nilikha ni

Woody

4. Nobyembre 2026NO
3
0
0
1
0

Flat Harvesting Basket: the Willow 3-Peck Fruit Flat (Hasluck, 1903)

The basket-maker's 'flat' for the fruit season: an oblong willow basket with a woven stick bottom about 19 1/2 in wide, straight sides 8 in high, a rope handle at each end and its own flat lid on a bent bow. Rough brown osiers do for the bottom; eight white ones start the sides. Source: Paul N. Hasluck, Basket Work of All Kinds (1903), pp. 64-69. Picture: Fig. 65 of the book.
Abantado
Unknown

Mga Tagubilin

1

Soak the osiers and weave the bottom

Soak the osiers until pliable. Cut eight sticks about 17 in long; set the two thickest in the screw-block 19 1/2 in apart outside, the rest between, and weave the bottom with the roughest osiers as for Hasluck's square basket. Take it out and trim it with the picking knife.

Mga materyales para sa hakbang na ito:

Mas makakapal na sanga ng wilowMas makakapal na sanga ng wilow8 17 in
Sanga ng willowSanga ng willow1 weavers

Mga kailangang kasangkapan:

TubigTubig
Gunting pamutol ng sangaGunting pamutol ng sanga
Patag na Tablang KahoyPatag na Tablang Kahoy
2

Stake up

Drive nine stakes into the weaving beside the sticks along each side, and seven through the sticks at each end after opening holes with the bodkin, the eight thickest at the corners. Prick them up and gather them in a hoop.

Mga materyales para sa hakbang na ito:

Mga tulos na sanga ng willowMga tulos na sanga ng willow32 9 per side, 7 per end

Mga kailangang kasangkapan:

BodkinBodkin
Gunting pamutol ng sangaGunting pamutol ng sanga
3

Upset the sides

Point eight white osiers. With no foot rim, start by driving four in beside the first stakes at the left of one 19 1/2 in side. Sitting high with the work between your knees, upset with four rods pulled tight into the bend of each stake, each in front of three stakes, behind the fourth and out (Fig. 65). Start the other four at the opposite corner, finish the tops round the corners, then add one more round with three rods.

Mga materyales para sa hakbang na ito:

Sanga ng willowSanga ng willow8 white, upsetting

Mga kailangang kasangkapan:

Gunting pamutol ng sangaGunting pamutol ng sanga
BodkinBodkin
MartilyoMartilyo
4

Weave and add handles

Weave with rods in their lengths, each butt behind the next stake, left to right, until the sides are 8 in high all round outside. For each end handle push a stiff rod down beside the third stake, twist it rope-like, push its top through about 1 1/2 in below the top by the fifth stake, leave a bow, and twist it over the bow three times (Fig. 66).

Mga materyales para sa hakbang na ito:

Sanga ng willowSanga ng willow1 weaving
Sanga ng willowSanga ng willow2 handles

Mga kailangang kasangkapan:

MartilyoMartilyo
BodkinBodkin
5

Pair off and border

Pair off a round with two rods from the back. Make the border by laying down stakes and working them round the corners (Fig. 67), finish by cramming, and trim inside and out.

Mga materyales para sa hakbang na ito:

Sanga ng willowSanga ng willow2 pairing

Mga kailangang kasangkapan:

Malaking guntingMalaking gunting
Gunting pamutol ng sangaGunting pamutol ng sanga
6

Make the lid

Notch a bow stick at the corners, bend it to the basket's shape and tie a strainer across to hold the width. Bind in two thick split sticks a little longer than the flat, flat side inward, on four scallom rods lapped round the bow (Figs. 68-69), and weave the lid between them.

Mga materyales para sa hakbang na ito:

Mas makakapal na sanga ng wilowMas makakapal na sanga ng wilow3 bow, two lid sticks
Sanga ng willowSanga ng willow1 scalloms, weavers

Mga kailangang kasangkapan:

Gunting pamutol ng sangaGunting pamutol ng sanga
MartilyoMartilyo

Mga Materyales

3

Mga Kinakailangang Kasangkapan

6

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...