SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Fleshing Beam from a Rounded Half-Log
Hides are laid over a beam and scraped: the hair side with a blunt unhairing knife, the flesh side with a sharp fleshing knife. Shave the flat side of a half-log into a smooth round back, and set it sloping on two legs so the top end stands at the worker's hip.
The picture: our diagram of the beam on its legs.
Baguhan
Half a day
Mga Tagubilin
1
1
Round the back
Round the back
Lay the half-log flat side down. Shave off the bark and round the top with the drawknife, then smooth it with the spokeshave so there are no ridges to cut the hide.
Mga materyales para sa hakbang na ito:
Kalahating troso ng matigas na kahoy1 pirasoMga kailangang kasangkapan:
Kutsilyong Hinihila
Katam na dalawa ang hawakan2
2
Legs
Legs
Saw two legs from shafts. Drill two splayed holes into the underside near one end and drive the legs in, wedged tight.
Mga materyales para sa hakbang na ito:
Tuwid na baras na kahoy2 pirasoMga kailangang kasangkapan:
Lagaring Pangkamay
Barenang de-kamay
Kahoy na Pamukpok
Ruler3
3
Smooth and set up
Smooth and set up
Sand the top end smooth, stand the beam with its low end on the ground, and trim the legs until the top sits at hip height.
Mga kailangang kasangkapan:
Papel de Liha
Lagaring Pangkamay
Ruler4
4
Slope
Slope
Naglo-load ng Jupyter notebook…
Mga Materyales
2- Placeholder
- 2 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.


