Snail trap
Mga Tagubilin
Top
Top
Cut the top of a 2L plastic bottle about 6 cm in height, and then cut out small tunnels on the bottom frame for the snail to crawl through.
The reason we have it as this is to prevent water/rain flowing into it.
Food tray
Food tray
Cut the bottom of a 1L plastic bottle about 1 cm in height.
Bottom
Bottom
Cut out a circle or square piece of wood.
Screw the plastic food tray into the middle.
If you want you can use a large nail, this will also be used to "plug" it into the dirt, so it don't topple over if there are alot of wind.
Then Glue or screw down the Top.
Whenever you need to refill it, unscrew the cork at the top and fill it up with snail repellents
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.