SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Glass Pipettes: Tube Drawn to a Tip, Graduated by Weighing Water
A pipette is a straight glass tube drawn to a narrow tip: dip it in, close the top with a finger, and let out just the volume you want. Drawn and left plain it is a simple transfer pipette; marked along its length it is a graduated pipette, and a Mohr pipette starts its marks well above the tip and is read as it drains.
The picture: our diagram of a plain and a graduated (Mohr) pipette.
Katamtaman
Half an hour per pipette
Mga Tagubilin
1
1
Draw the tip
Draw the tip
Heat a band of straight, even tube while turning, take it out and pull a short taper, as for a capillary. Cut it at the taper to leave a tip about 1 mm across.
Mga materyales para sa hakbang na ito:
Kit ng mga Tubong Salamin1 pirasoMga kailangang kasangkapan:
Pang-ihip ng salamin na pang-mesa
Panggurit na Diyamante
Salaming pangkaligtasan
Guwantes na Matibay sa Init2
2
Finish both ends
Finish both ends
Fire-polish the tip lightly without closing it, and fire-polish the top so a finger seals it well.
Mga kailangang kasangkapan:
Pang-ihip ng salamin na pang-mesa
Kikil (Kikil na Pangkamay)3
3
Graduate it (Mohr)
Graduate it (Mohr)
Fill above the top mark, let it drain into a weighed beaker on the balance, stopping each few grams and scratching a line at the level. Keep the first mark well above the tip.
Mga materyales para sa hakbang na ito:
Tubig0.2 litroMga kailangang kasangkapan:
Timbangang panimbang
Basong Salamin na Pang-agham
Panggurit na Diyamante
Ruler4
4
Mark spacing
Mark spacing
Naglo-load ng Jupyter notebook…
5
5
Use
Use
Hold it upright, tip in the liquid but off the bottom; draw liquid up with a bulb (never by mouth), close the top with your forefinger and let it down to the mark.
Mga Kinakailangang Kasangkapan
8- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.




