Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Gummed Paper Labels: Paper Backed with Gum Arabic, Moistened to Stick
Before self-adhesive labels, labels and stamps were gummed: the back is coated with a water-soluble gum such as gum arabic, left to dry, and moistened when the label is put on. Coat a sheet of paper, dry it flat, and cut it into labels.
The picture: our diagram, coating to cut labels.
Baguhan
An afternoon, plus drying
Mga Tagubilin
1
1
Make the gum
Make the gum
Soak gum arabic in about twice its weight of warm water until dissolved, warm it gently in a double boiler and strain out bits.
Mga materyales para sa hakbang na ito:
Gum Arabic50 g
Tubig0.1 litroMga kailangang kasangkapan:
Set ng mangkok na panghalo
Dobleng kaldero
Pinong Bithay2
2
Coat the back
Coat the back
Brush a thin, even coat on the back of the paper sheet. Let it dry and give it a second thin coat.
Mga materyales para sa hakbang na ito:
Papel2 pilyegoMga kailangang kasangkapan:
Brotsa sa pandikit
Pantuyuang Estante3
3
Dry flat
Dry flat
When the gum is dry to the touch, put the sheet between flat boards under a light weight so it does not curl.
Mga kailangang kasangkapan:
Patag na tabla ng pagpisa (magkapares)
Mga pabigat sa pagdiin4
4
Cut the labels
Cut the labels
Write or print on the front, then cut the sheet into labels. To fix one, moisten the gummed side and press it on.
Mga kailangang kasangkapan:
Kutsilyong Pang-arte
RulerMga Kinakailangang Kasangkapan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.


