SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Plain-Weave Cotton Cloth on a Rigid Heddle Loom
Plain weave is the simplest cloth: each crosswise thread goes over one lengthwise thread and under the next, and back the other way on the next pass. A rigid heddle loom does the lifting: one bar of slots and holes raises or lowers every other warp thread at once.
The thread is the 2-ply cotton from the hand-spinning blueprint, used for both warp and weft.
Katamtaman
About a week of evenings
Mga Tagubilin
1
1
The thread
The thread
Spinning and plying the cotton thread used here.
2
2
Find the sett
Find the sett
Wrap the thread round a ruler, touching but not crowded, and count the wraps in 2.5 cm. For plain weave set the warp at about half that many threads per 2.5 cm, and choose the heddle to match.
Mga kailangang kasangkapan:
Ruler3
3
Measure the warp
Measure the warp
On the warping board wind as many threads as the width times the sett, each the cloth's length plus about 50 cm for tying on and loom waste.
Mga materyales para sa hakbang na ito:
Sinulid na Bulak150 gMga kailangang kasangkapan:
Tablang panghanay ng hibla
Panukat na Tape4
4
Thread the heddle
Thread the heddle
Thread one warp end through each slot and each hole in turn, tie the ends to the back beam, wind on under even tension and tie on at the front.
Mga kailangang kasangkapan:
Habihang may matigas na suklay5
5
Weave
Weave
Raise the heddle, pass the shuttle through, beat the weft gently with the heddle; lower the heddle, pass back, beat. Leave the weft at a slant across the shed so the edges do not pull in.
Mga materyales para sa hakbang na ito:
Sinulid na Bulak120 gMga kailangang kasangkapan:
Habihang may matigas na suklay
Lansadera6
6
Cut off and secure
Cut off and secure
Cut the cloth off the loom and knot or hem both ends so the weft cannot slip off.
Mga kailangang kasangkapan:
Gunting sa tela7
7
Wash to finish
Wash to finish
Wash the cloth in hot water, dry it, and measure it: the threads relax and close up. Note how much it shrank for the next warp.
Mga kailangang kasangkapan:
Panukat na Tape8
8
Troubleshooting
Troubleshooting
Plain weave troubleshooting.
Flow
Loading...
Mga Materyales
1- 270 gPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.