Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
HDPE Pellets: Ethylene Polymerised in a Fluidised Bed
Charlie

Nilikha ni

Charlie

17. Oktubre 2026DE
6
0
0
0
0

HDPE Pellets: Ethylene Polymerised in a Fluidised Bed

High-density polyethylene is made at low pressure on a Ziegler catalyst (a titanium halide with an aluminium compound). In the gas-phase process, ethylene flows up through a fluidised bed of fine catalyst at 85–100 °C and 20 bar and grows into polymer powder, which is melted and cut into pellets. The picture: our diagram of the bed reactor and extruder.
Abantado
Continuous

Mga Tagubilin

1

Polymerise in a fluidised bed

Feed fine catalyst into the bed reactor and blow ethylene up through it at 85–100 °C and 20 bar. The polymer grows on the catalyst grains.

Mga materyales para sa hakbang na ito:

EthyleneEthylene1 t

Mga kailangang kasangkapan:

Fluidised-bed reactorFluidised-bed reactor
Ziegler-Natta catalyst (TiCl4 sa MgCl2)Ziegler-Natta catalyst (TiCl4 sa MgCl2)
Kompresor ng gasKompresor ng gas
2

Take off the powder

Draw the polyethylene powder off the bed; compress the unreacted ethylene and send it round again.

Mga kailangang kasangkapan:

Fluidised-bed reactorFluidised-bed reactor
Kompresor ng gasKompresor ng gas
3

Pelletise

Melt the powder in the extruder and cut the strand into pellets.

Mga kailangang kasangkapan:

Extruder ng plastikExtruder ng plastik
4

Ethylene gas per kilogram of polymer

Naglo-load ng Jupyter notebook…

Mga Materyales

1
  • 1
    Ethylene
    1 t
    Placeholder

Mga Kinakailangang Kasangkapan

4

Ang blueprint na ito ay gumagawa ng

Thumbnail
Placeholder

Butil na HDPE

Free

126
0
1

Kaugnay na Blueprint

Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

Ethylene by Steam Cracking of Naphtha

Ethylene by Steam Cracking of Naphtha

ni CharlieDE

Industriyal

12
0
0
0
0
0
Polypropylene Pellets by Bulk Polymerisation in Liquid Propylene

Polypropylene Pellets by Bulk Polymerisation in Liquid Propylene

ni CharlieDE

Polymer

10
0
0
0
0
0

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...