SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Hot-Air Popcorn Popper
Cretors' machine, already published, pops corn in hot oil in a heated kettle - the oil carries heat to the kernels and stays in the popcorn afterwards. The rung above it carries the heat in air instead: a blast up through a perforated floor tumbles the kernels, and the popped ones, being light and large, are blown straight out of the chamber before they can scorch.
**US 4,152,974**, "Hot air corn popper", Lawrence J. Tienor, assigned to National Presto Industries, filed 16. June 1978, granted 8. May 1979: a popping vessel closed at the bottom by "a perforated grill, the perforations of the grill being smaller than the size of unpopped corn kernels", with hot air driven up through it.
**You build that chamber** from a steel can and mesh, blow it with a heat gun on a stand, and compare its yield with a pan of oil.
Katamtaman
2 hours
Mga Tagubilin
1
1
Cut the chamber
Cut the chamber
Remove both ends of a 100 mm steel food can and deburr. Cut a disc of stainless mesh to fit inside and fix it 20 mm from one end: kernels must sit on it, air must pass, and no kernel must fall through.
Mga materyales para sa hakbang na ito:
Lata1 piraso
Lalang asero na walang kalawang, antas pagkain1 pirasoMga kailangang kasangkapan:
Gunting na pangyero
Kikil na Pang-metal
Malinaw na Salaming Pangkaligtasan2
2
Stand it over the gun
Stand it over the gun
Clamp the heat gun upright, nozzle up, on a non-flammable surface, and set the can above it so all the air goes through the mesh. Angle the top of the can over a bowl. Never hold either in your hands while it runs.
Mga kailangang kasangkapan:
Pang-init na baril na hangin
Mga guwantes sa paghihinang
Malaking mangkok na salamin3
3
Find the air temperature
Find the air temperature
Run the gun on its lower setting and read the air at the mesh with the infrared thermometer aimed at a scrap of steel resting there. Aim for about 200 °C: hotter scorches, cooler will not pop.
Mga kailangang kasangkapan:
Termometrong Infrared4
4
Pop by air
Pop by air
Weigh 50 g of kernels into the chamber and run until popping slows to one every few seconds. Catch the popcorn in the bowl. Weigh what did not pop and measure the popcorn's volume in a jug.
Mga materyales para sa hakbang na ito:
Butil ng maisang pamparusok50 gMga kailangang kasangkapan:
Digital na Timbangang Pangkusina
Silindrong may sukatan
Panukat ng Oras5
5
Pop in oil
Pop in oil
For comparison, pop another 50 g in a covered saucepan with 15 ml of oil over a medium hob. Weigh the unpopped kernels and measure the volume the same way.
Mga materyales para sa hakbang na ito:
Mantikang panluto15 ml
Butil ng maisang pamparusok50 gMga kailangang kasangkapan:
Kasarolang mataas ang gilid
Digital na Timbangang Pangkusina6
6
Pressure and yield
Pressure and yield
Naglo-load ng Jupyter notebook…
7
7
History & Context
History & Context
**What the patent specifies:** an upward hot-air flow through a perforated grill whose holes are smaller than a kernel, popping the corn and carrying the popped kernels out to a receptacle. **Modern build (derived):** a steel can, stainless mesh and a heat gun on a stand.
Hot-air poppers sold in millions in the 1970s and 80s as the oil-free way to make popcorn. Their limits: no oil means seasoning will not stick; the airstream throws unpopped kernels out too if it is too strong; and the corn must be fresh enough to hold its water.

Mga Materyales
4- 1 pirasoPlaceholder
- Placeholder
- Placeholder
- 15 mlPlaceholder
Mga Kinakailangang Kasangkapan
11- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Mga guwantes sa paghihinang10% komisyonPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.
