Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Incense Sticks: Charcoal and Gum Paste Rolled onto Bamboo Cores
A cored incense stick is a thin bamboo stick coated in a thick layer of combustible paste that smoulders away with the core. Charcoal dust is the fuel, a little saltpetre keeps it burning and a gum binds it. Roll the paste onto bamboo sticks, trim them and dry them slowly so they do not warp.
The picture: our diagram, coated sticks, one smouldering.
Baguhan
An afternoon, then drying
Mga Tagubilin
1
1
Split the cores
Split the cores
Split bamboo into thin, straight sticks of even length.
Mga materyales para sa hakbang na ito:
Baretang kawayan1 pirasoMga kailangang kasangkapan:
Kutsilyo
Sangkalan2
2
Make the paste
Make the paste
Grind charcoal dust finer with a little saltpetre and sieve it. Dissolve gum arabic in a little water and knead it into the dust to a stiff, smooth dough. Wear a mask.
Mga materyales para sa hakbang na ito:
Uling - pinong durog80 g
Potassium nitrate (salitre)5 g
Gum Arabic8 gMga kailangang kasangkapan:
Almires at Panghalo
Pinong Bithay
Mangkok
Tubig
Maskara Laban sa Alikabok3
3
Roll
Roll
Roll a little paste into a thin coil, lay a stick beside it and roll the two together on the board until the stick is centred and coated, leaving a bare handle.
Mga kailangang kasangkapan:
Sangkalan4
4
Dry slowly
Dry slowly
Trim the ends and lay the sticks on a tray in the shade, turning them now and then, until hard and dry.
Mga kailangang kasangkapan:
Patag na bandehang pampatuyoKutsilyo5
5
Paste for your sticks
Paste for your sticks
Naglo-load ng Jupyter notebook…
Mga Materyales
4- 1 pirasoPlaceholder
- Placeholder
- Placeholder
- 8 gPlaceholder
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.