Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Industrial Air Compressor: a Converted Motorcycle Engine, Motor-Driven (Shop Notes, 1919)
A workshop compressor driven by a 1 hp electric motor: an old single-cylinder motorcycle engine rebored and run as a pump, its exhaust port blanked, its own automatic inlet valve taking in air, and a ball check valve in the spark-plug hole sending air to a tank.
Source: Popular Mechanics Shop Notes for 1919, pp. 3166-3167. Unknown: tank, belt and sizes. Picture: the article's drawing.
Katamtaman
Unknown
Mga Tagubilin
1
1
Recondition the cylinder
Recondition the cylinder
Rebore the old engine and fit a new piston for good compression. Remove the exhaust valve and bolt a steel plate, with a gasket under it, over the exhaust port. Leave the automatic inlet valve as it is: it now draws in air.
Mga materyales para sa hakbang na ito:
Hindi kilalang materyal1 old motorcycle engine
Kabuuan ng pistón at biyela1 new piston
Plantsang asero na malambot1 blanking plate
Gasket na pansara1 piraso
Turnilyong anim-anggulo - uri 8.81 pirasoMga kailangang kasangkapan:
Baras sa panloob na paggupit
Torno para sa Metal
Barenang de-kamay
Llaveng ingles2
2
Fit the outlet
Fit the outlet
In place of the priming cock on top of the cylinder (the drawing shows it screwed into the spark-plug hole) fit a ball-valve hose connection, and run its hose to the air tank.
Mga materyales para sa hakbang na ito:
Balbulang pantsek na may bola1 piraso
Air hose1 pirasoHindi kilalang materyal1 air tankMga kailangang kasangkapan:
Llaveng ingles3
3
Fit the drive and mount it
Fit the drive and mount it
Fit a longer main shaft and key an ordinary shaft pulley on its end. Leave the old flywheel in place for momentum. Bolt steel lugs to the floor and fasten the engine base to them. Belt it to a 1 hp, 110 volt motor, and put oil in the crankcase for splash lubrication.
Mga materyales para sa hakbang na ito:
Bilog na Bara ng Malambot na Asero1 longer main shaft
Kalo1 pirasoPlantsang asero na malambot1 floor lugsTurnilyong anim-anggulo - uri 8.81 piraso
De-kuryenteng motor1 1 hp, 110 V
Langis ng makina1 pirasoMga kailangang kasangkapan:
Torno para sa MetalLlaveng inglesMga Materyales
11- 1 air tankPlaceholder
- 1 new pistonPlaceholder
- 1 floor lugsPlaceholder
- 1 pirasoPlaceholder
- Placeholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 longer main shaftPlaceholder
- 1 pirasoPlaceholder
- 1 1 hp, 110 VPlaceholder
- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
4- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.