Isolating Platinum from Alluvial Deposits — The Unwanted Silver of the Conquistadors
Platinum (Pt, element 78) was encountered by Spanish conquistadors in the alluvial gold deposits of Colombia's Chocó region in the 16th century. They called it platina — 'little silver' — a dismissive term, because the dense, silvery-white grains contaminated their gold concentrates and could not be melted or worked with the technology available. Spanish authorities considered it worthless and even ordered it thrown back into the rivers to prevent it from being used to adulterate gold. This was arguably the most expensive mistake in the history of metallurgy — platinum is now more valuable than gold.
Antonio de Ulloa published the first scientific description of platinum in 1748, based on specimens collected during a French geodetic expedition to Peru (1735–1744). The metal resisted all attempts at melting — its melting point (1768 °C) was far beyond what any furnace of the time could achieve. It was not until 1782 that Antoine Lavoisier succeeded in melting platinum using an oxygen-hydrogen blowpipe, and 1804 when William Hyde Wollaston developed a practical method using powder metallurgy (pressing and sintering sponge platinum).
Platinum occurs primarily as native metal grains in alluvial (placer) deposits, where it concentrates alongside gold due to its extreme density (21.45 g/cm³ — denser than gold at 19.32 g/cm³). The extraction from alluvial deposits uses gravity separation — identical in principle to gold panning, but targeting the densest fraction. Chemical purification requires aqua regia (a mixture of hydrochloric and nitric acids), which is one of the few reagents capable of dissolving platinum.
HAZARD: Aqua regia (used in purification) is extremely corrosive — a mixture of concentrated hydrochloric and nitric acids that produces toxic chlorine and nitrosyl chloride fumes. Handle only outdoors with full respiratory protection, chemical-resistant gloves, and eye protection. Platinum metal itself is non-toxic and biologically inert.
Hazardous content
Ang blueprint na ito ay naglalaman ng mga mapanganib na proseso. Mag-log in at i-enable ang mapanganib na nilalaman sa iyong account settings upang makita ang step-by-step na mga tagubilin.
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.