SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Lidded Storage Jar: a Coil-Built Pot with a Fitted Flanged Lid
Fired clay does not rust, react with salts or let light through, which is why herbs, pigments and remedies were kept in clay jars. This is our coil pot with a straight neck and a lid that sits inside it on a flange, made from the same clay at the same time so both shrink alike.
The picture: a lidded earthenware jar with a horn handle, Korea, Silla or Kaya period (Cleveland Museum of Art).
Katamtaman
A week with drying and firing
Mga Tagubilin
1
1
Wedge the clay
Wedge the clay
Wedge about 3 kg of clay body for the jar and its lid together, so both come from the same batch (the amount is ours, for a jar about 15 cm tall).
Mga materyales para sa hakbang na ito:
Hinandang luwad ng magpapalayok3 kgMga kailangang kasangkapan:
Canvas na pagawaan ng palayok
Kutsilyo2
2
Build the jar
Build the jar
Build a coil pot as in the coil pot blueprint, but bring the neck up straight and finish the rim level all round, so a lid can sit on it.
3
3
Make the lid
Make the lid
While the jar is still soft, roll a disc a little wider than the mouth. Measure the inside of the neck and add a coil ring underneath the disc that just fits inside it: the flange that keeps the lid from sliding. Score, slip and join it, and add a knob on top.
Mga materyales para sa hakbang na ito:
Slip ng palayok (likidong luwad)1 as requiredMga kailangang kasangkapan:
Canvas na pagawaan ng palayok
Kasangkapang panggasgas ng luwad
Set ng kasangkapan sa luwadKutsilyo4
4
Fit at leather-hard
Fit at leather-hard
When jar and lid are both leather-hard, try the lid in place and pare the flange or rim until it seats without rocking. Smooth both with a damp sponge.
Mga kailangang kasangkapan:
Set ng kasangkapan sa luwad
Set ng espongha ng palayukan5
5
Dry and fire together
Dry and fire together
Dry them slowly to bone-dry, the lid off the jar, and fire them in the same pit firing as the coil pot, so they shrink alike.
Mga materyales para sa hakbang na ito:
Panggatong1 as requiredMga kailangang kasangkapan:
PalaMga Materyales
3- Placeholder
- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.