Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Lycopodium Powder: Spores Shaken from Dried Clubmoss Cones
Lycopodium powder is the dry, yellow-tan spores of clubmoss, chiefly stag's horn clubmoss (Lycopodium clavatum). Cut the ripe spore cones, dry them, and tap the spores out. A cloud of it in air burns in a flash: keep it away from flames.
The picture: a cone before drying, dried, and emptied of spores (Havardtl, CC BY-SA 4.0).
Baguhan
A week to dry
Mga Tagubilin
1
1
Cut the cones
Cut the cones
Cut the upright spore cones from stag's horn clubmoss, leaving the rest of the plant.
Mga materyales para sa hakbang na ito:
Mga kono ng spora ng lycopodium (Lycopodium clavatum)200 gMga kailangang kasangkapan:
Gunting pamutol ng sanga2
2
Dry
Dry
Spread the cones on a tray indoors, out of draughts, and leave them until dry; the spores start to fall out as a yellow dust.
Mga kailangang kasangkapan:
Patag na bandehang pampatuyo3
3
Tap out and sift
Tap out and sift
Tap each cone over the tray to empty it, then sift the dust through a fine sieve to take out bits of cone. Wear a dust mask; keep flames away.
Mga kailangang kasangkapan:
Patag na bandehang pampatuyo
Pinong Bithay
Maskara Laban sa Alikabok
Timbangang panimbang4
4
Store
Store
Keep the powder dry in a closed jar.
Mga kailangang kasangkapan:
Garapong Salamin5
5
Powder from your cones
Powder from your cones
Naglo-load ng Jupyter notebook…
Mga Materyales
1- Placeholder
Mga Kinakailangang Kasangkapan
6- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

