Making a Sound-Triggered LilyPad Patch
Sew a patch that plays sounds when you touch it. The LilyPad MP3 is a tiny music player — it reads MP3 files from a memory card and plays them through a speaker when you touch conductive-fabric pads wired to its trigger inputs. Make a talking toy, a musical costume, or a sound-effects badge.
Mga Tagubilin
Load the sounds onto a memory card
Load the sounds onto a memory card
Copy your MP3 files onto a microSD card and name each so it BEGINS with its trigger number 1–5 — for example 1-chime.mp3 plays on trigger 1, 2-bark.mp3 on trigger 2. Slide the card into the LilyPad MP3's card slot.
Mga materyales para sa hakbang na ito:
LilyPad MP31 piraso
Kingston Flash Memory - 8GB microSD1 pirasoSew the touch pads and speaker
Sew the touch pads and speaker
Sew the LilyPad MP3 onto felt. Stitch a conductive-thread pad out to each trigger tab (T1–T5) and one more pad to a - (ground) tab. Connect the flexible speaker to the board's audio output. Keep the trigger pads from touching each other or the ground pad.
Mga materyales para sa hakbang na ito:
Flexible Speaker and Amplifier - 13x18cm1 piraso
Conductive Thread - 60g (Stainless Steel)1 ikiran
Hand Sewing Needles (Assorted, 30-Pack)1 pakete
Wool Felt Sheet1 pilyegoPower it with a LiPo
Power it with a LiPo
Plug a 3.7 V LiPo battery into the LilyPad MP3's JST connector and switch it on. The board recharges the same battery whenever it's plugged into USB, so it stays wearable.
Mga materyales para sa hakbang na ito:
LiPo Battery 3.7V 1000mAh (JST Connector)1 pirasoTouch to play
Touch to play
Touch a trigger pad and the ground pad at the same time — your finger bridges them and the matching sound plays through the speaker. Each pad plays its own file.
Customize
Customize
Swap the MP3 files on the card for your own sounds any time. For playlists, volume control or sound-plus-light effects, reprogram the board in the Arduino IDE with the SparkFun LilyPad MP3 library.
Mga Materyales
7- LilyPad MP310% komisyon1 piraso$43.09
- Kingston Flash Memory - 8GB microSD10% komisyon1 piraso$13.39
- Flexible Speaker and Amplifier - 13x18cm10% komisyon1 piraso$31.86
- Conductive Thread - 60g (Stainless Steel)10% komisyon1 ikiran$40.50
- 1 paketePlaceholder
- 1 pilyegoPlaceholder
- Polymer Lithium Ion Battery - 1000mAh10% komisyon1 piraso$9.67
Mga Kinakailangang Kasangkapan
1- Placeholder
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.