SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Newton's Rings
Penny

Nilikha ni

Penny

30. Agosto 2026DK
37
0
0
0
0

Newton's Rings

Hooke saw them in 1665 and Newton measured them, which is the difference that matters. Press a convex lens onto a flat piece of glass and coloured rings appear around the contact point — in monochromatic light, dark and bright circles; in daylight, a bullseye of spectral colour. The wedge of air between the two surfaces grows in thickness as the square of the distance from the contact. Light reflected from the top of that wedge and from the bottom travels different distances and interferes, so a ring appears wherever the extra path is a whole number of wavelengths. Count the rings and you have measured the gap — in units of half a wavelength, about a third of a micrometre, on apparatus that costs less than a set of drill bits. The centre is DARK in reflection, and that detail defeated Newton. His corpuscles offered no reason why two surfaces in contact should reflect nothing at all. The wave explanation is one line: reflection off the denser medium at the bottom of the film flips the phase, the top reflection does not, and at zero thickness the two cancel exactly. He recorded the effect faithfully for forty years and never could account for it. This is the first blueprint in an interferometry batch because it is the whole idea in its simplest form: stop comparing your object to a ruler and start comparing it to a wave.
Baguhan
2 hours

Mga Tagubilin

1

Make the rings

Clean a plano-convex lens and a glass flat with isopropyl alcohol. One speck of dust holds the surfaces apart and destroys the pattern. Rest the curved face on the flat and press gently at the centre. Illuminate from above through a half-silvered slide at 45 degrees, using a sodium lamp or a white LED behind a narrow-band filter, and look down through the slide with the hand lens.

Mga materyales para sa hakbang na ito:

Set ng lenteng patag-kumbeksSet ng lenteng patag-kumbeks1 piraso
Salaming pantanaw na may pantakipSalaming pantanaw na may pantakip1 piraso
Isopropyl Alcohol 99 %Isopropyl Alcohol 99 %30 ml

Mga kailangang kasangkapan:

Lupang Pangkamay 10xLupang Pangkamay 10x
Kit ng Optical BenchKit ng Optical Bench
Pinagmumulan ng liwanag na LEDPinagmumulan ng liwanag na LED
2

Measure eight rings

Photograph the pattern against a steel rule in the same plane, then measure ring DIAMETERS from the image — diameters, not radii, because the centre is the hardest point to locate and cancels out. Take the even-numbered dark rings from 2 to 16. Record each diameter in millimetres.

Mga kailangang kasangkapan:

RulerRuler
Digital na Kalibrador 6 PulgadaDigital na Kalibrador 6 Pulgada
Desktop na KompyuterDesktop na Kompyuter
3

Fit the radius, and compare the alternatives

Naglo-load ng Jupyter notebook…

Mga kailangang kasangkapan:

Desktop na KompyuterDesktop na Kompyuter
4

Compendium: the dark centre

WHY THE CENTRE IS DARK, AND WHY IT MATTERED. At contact the film has zero thickness, so both reflections travel the same distance and ought to add. They cancel, because the reflection at the air-to-glass boundary underneath inverts the wave and the glass-to-air one above does not. Newton recorded this for forty years without explaining it — corpuscles offer no mechanism for a reflection that depends on which material you are entering. STILL USED DAILY. An optical flat on a workpiece under monochromatic light maps its departure from flatness, one half-wavelength per fringe. Gauge blocks, seal faces and lens surfaces are checked this way now — the same observation promoted from curiosity to acceptance test, and the direct ancestor of the Fizeau wedge in blueprint 3.

Mga Materyales

3

Mga Kinakailangang Kasangkapan

6

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...