Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Nylon Webbing: 1-inch Herringbone Twill to MIL-W-4088
Nylon webbing is a narrow, dense strap woven from nylon 6,6 yarn. The US military specification MIL-W-4088 sets each type exactly. Its Type II is 1 inch wide, woven on a shuttle loom in a 2 up, 2 down herringbone twill that reverses once at the centre, with at least 134 warp ends and 34 picks per inch. It must weigh no more than 0.42 oz per yard and hold at least 600 lb. The webbing is left untreated and unbleached.
The picture: webbing rolls (Wikimedia Commons, public domain).
Katamtaman
2 days
Mga Tagubilin
1
1
Twist the yarns
Twist the yarns
Use bright, unbleached nylon 6,6 multifilament: 420 denier of 68 filaments for the warp, 840 denier of 140 filaments for the filling. Give each yarn at least 2½ turns per inch.
Mga materyales para sa hakbang na ito:
Hibla ng naylon13 g/mMga kailangang kasangkapan:
Gulong na pansulid
Timbangang panimbang2
2
Warp 134 ends
Warp 134 ends
Wind at least 134 warp ends (single yarns) and thread them for a 2 up, 2 down herringbone twill with one reversal at the centre of the strap, 1 inch wide.
Mga kailangang kasangkapan:
Kuwadrong panghanay
Habihan na may tuntungan
Ruler3
3
Weave 34 picks per inch
Weave 34 picks per inch
Weave with a shuttle, at least 34 picks of filling per inch. Keep the width at 1 inch ± 1/32 and the thickness at .025-.040 inch.
Mga kailangang kasangkapan:
Habihan na may tuntungan
Sasakyang lansaderaRuler4
4
Check and roll
Check and roll
A yard must weigh no more than 0.42 oz (13 g per metre). The specification puts the webbing up in rolls of 90 to 110 yards and asks a breaking strength of at least 600 lb.
Mga kailangang kasangkapan:
Timbangang panimbang
GuntingMga Materyales
1- 13 g/mPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.