Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Oil Bath: a Metal Jacket of Dried Oil with a Thermometer (Morfit, 1849)
Charlie

Nilikha ni

Charlie

7. Nobyembre 2026DE
2
0
0
0
0

Oil Bath: a Metal Jacket of Dried Oil with a Thermometer (Morfit, 1849)

A bath of hot oil that heats a flask, dish or retort evenly at temperatures above the boiling point of water. Campbell Morfit (1849) builds it exactly like his water-bath: a metal (or porcelain-lined) vessel holding the oil, with the vessel to be heated set in it, and a thermometer in the oil to read and regulate the heat. He gives up to 570 °F (about 300 °C). The oil is first heated for several hours in an iron capsule to drive out its moisture. Which oil, and the vessel sizes, are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 182-185. Picture: his water-bath, Fig. 150.
Baguhan
Several hours (drying the oil)

Mga Tagubilin

1

Read Morfit

"The oil should, before its transfer to the bath, be heated in an iron capsule for several hours, to expel moisture. The bath consists of a porcelain lined or metallic jacket, of construction exactly similar to that of the water-bath. It affords a temperature of 570° F., and the facility of determining its temperature, for which purpose a thermometer is a necessary accompaniment."
2

Dry the oil

Heat the oil in an iron capsule for several hours to drive off its moisture. Do not heat it so far that it decomposes. Which oil is not given (unknown). Ours: a shallow metal pan for the iron capsule.

Mga materyales para sa hakbang na ito:

Hindi kilalang materyalHindi kilalang materyal1 oil

Mga kailangang kasangkapan:

Mababaw na bandehang metalMababaw na bandehang metal
Pugon na UlingPugon na Uling
TermometroTermometro
3

Set up the jacket

Take a metal vessel wide enough that the vessel to be heated sits inside with space at the bottom and sides (Fig. 150: the outer vessel A carries an inner flange a on which the dish B rests). Pour in the dried oil, set the thermometer in the oil, and heat on a charcoal furnace or gas stove. Sizes are not given (unknown). Ours: a metal pot.

Mga materyales para sa hakbang na ito:

PalayokPalayok1 piraso

Mga kailangang kasangkapan:

TermometroTermometro
Pugon na UlingPugon na Uling
Hindi alam na sukatHindi alam na sukat
4

Use it

Set the flask, dish or retort in the oil and regulate the fire by the thermometer. Oil loses less by evaporation than water and gives temperatures above 100 °C, up to 570 °F (about 300 °C). Boiling oil throws off a very disagreeable vapour; keep the heat below the point where the oil decomposes.

Mga kailangang kasangkapan:

TermometroTermometro
Pugon na UlingPugon na Uling

Mga Materyales

2

Mga Kinakailangang Kasangkapan

4

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...