SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Phthalic Anhydride by Air Oxidation of Naphthalene: Gibbs and Conover, 1918
Harry D. Gibbs and Courtney Conover patented this in 1918, US 1,285,117 (filed 1917), and dedicated it to the public. Phthalic anhydride had been made by oxidising naphthalene with sulphuric acid in the presence of mercury sulphate; they used air instead. Naphthalene vapour mixed with plenty of air is passed over finely divided oxides of vanadium at 350–550 °C, and the phthalic anhydride formed is condensed and separated by fractional sublimation.
Abantado
Works process
Mga Tagubilin
1
1
Melt and vaporise the naphthalene
Melt and vaporise the naphthalene
Melt the naphthalene and let it flow continuously, at a measured rate, into a heated chamber where it is volatilised.
Mga materyales para sa hakbang na ito:
Naptalina1 as requiredMga kailangang kasangkapan:
Kaldero ng pagtunaw na kaeng bakal
Silid na pampasingaw
Termometro2
2
Mix the vapour with air
Mix the vapour with air
Mix the naphthalene vapour with air in excess of the amount needed to oxidise it to phthalic anhydride, preferably at least four times the amount theoretically required.
Mga kailangang kasangkapan:
Panghihip ng hanginSilid na pampasingaw3
3
Pass it over vanadium oxide at 350–550 °C
Pass it over vanadium oxide at 350–550 °C
Pass the mixture into a reaction chamber kept at 350–550 °C, preferably 500 °C. There it is forced into close contact with oxides of vanadium in the form of a fine powder, supported on trays, with baffle plates forcing the gas current through it. Keep the gases under pressure only sufficient to make them flow continuously through the chamber. The naphthalene is oxidised to phthalic anhydride, with carbon dioxide and water.
Mga kailangang kasangkapan:
Silid ng catalyst na may mga tray
Vanadium oxide
PirometroPanghihip ng hangin4
4
Condense the products
Condense the products
Condense the products of the reaction, phthalic anhydride with small portions of other oxidation products of naphthalene, together with the unchanged naphthalene.
Mga kailangang kasangkapan:
Silid na pang-condense5
5
Separate by fractional sublimation
Separate by fractional sublimation
Separate the phthalic anhydride from the other oxidation products and the unchanged naphthalene by fractional sublimation.
Mga kailangang kasangkapan:
Kagamitang pang-sublimationTermometro6
6
How much air
How much air
Naglo-load ng Jupyter notebook…
Mga Kinakailangang Kasangkapan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.