Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Platinum Crucible: Shaped from Foil in a Hollow in a Board (Morfit, 1849)
Charlie

Nilikha ni

Charlie

7. Nobyembre 2026DE
4
0
0
0
0

Platinum Crucible: Shaped from Foil in a Hollow in a Board (Morfit, 1849)

A small platinum crucible for igniting precipitates at high heat. Campbell Morfit (1849): "The experimenter himself can in any emergency readily form a crucible out of platinum foil by shaping it with the thumb or a small hammer, in a hemispherical cavity made in a board for the purpose." Platinum crucibles must be of pure metal and hammered, not turned; thin enough to weigh on a delicate balance. Foil thickness and the size of the hollow are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 196-197. Picture: Fig. 164.
Baguhan
Unknown

Mga Tagubilin

1

Read Morfit

"The experimenter himself can in any emergency readily form a crucible out of platinum foil by shaping it with the thumb or a small hammer, in a hemispherical cavity made in a board for the purpose."
2

Make the hollow

Cut a hemispherical cavity in a board, the size of the crucible wanted. Morfit's crucibles hold from a fluidrachm to three fluid ounces; a half-ounce one is the most needed in analysis. How the cavity is cut is not given (ours: a gouge in a hardwood board).

Mga kailangang kasangkapan:

Tabla ng Matigas na KahoyTabla ng Matigas na Kahoy
Paet na HukayPaet na Hukay
Hindi alam na sukatHindi alam na sukat
3

Shape the foil

Lay a piece of pure platinum foil over the hollow and press it in with the thumb, or work it in with a small hammer, until it takes the hemispherical shape. The foil thickness, and how the foil is made, are not given (unknown).

Mga materyales para sa hakbang na ito:

PlatinoPlatino1 foil

Mga kailangang kasangkapan:

Tabla ng Matigas na KahoyTabla ng Matigas na Kahoy
Martilyong bilog ang isang uloMartilyong bilog ang isang ulo
Hindi kilalang paraan ng paghubogHindi kilalang paraan ng paghubog
4

Care of the crucible

Blisters and flaws that appear after use come from impure metal and bad workmanship; remove them by the force of a small hammer. Loosen salts with boiling water and rub off stains with sand or pumice stone. Do not use sharp pointed instruments on it.

Mga kailangang kasangkapan:

Martilyong bilog ang isang uloMartilyong bilog ang isang ulo

Mga Materyales

1
  • 1 foil
    Placeholder

Mga Kinakailangang Kasangkapan

5

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...