SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Propane Hand Torch: Goss, 1949
John C. Goss of Pittsburgh patented this hand torch, US 2,465,643, in March 1949. It burns propane, which turns from liquid to gas so readily that, shut in a tank, it makes its own working pressure: unlike the older blow torch, it needs no pump. The knurled cylindrical tank is also the handle. A dispersion tube hangs from the tank top to about half the tank's height and draws gas, not liquid, through a minute port in its end cap. A needle valve meters the gas to a nozzle bent back at about thirty degrees to the tank. A spring-loaded ball check valve lets the tank be filled from a supply bottle but lets nothing out.
Abantado
Workshop process
Mga Tagubilin
1
1
Tank
Tank
Make an elongated, gas-tight cylindrical metal tank with a bottom and a top. Knurl rows of bands round the outside: the tank is also the handle.
Mga materyales para sa hakbang na ito:
Knurled na tangke ng gasolina ng sulô1 pirasoMga kailangang kasangkapan:
Torno para sa Metal
Kasangkapang knurling2
2
Top with bosses
Top with bosses
Form the tank top with a valve boss and a nozzle boss integral with it. The valve boss holds a chamber divided by a valve seat; a channel joins the chamber above the seat to the bore of the nozzle boss.
Mga materyales para sa hakbang na ito:
Takip ng tangke ng sulô na may boss ng balbula at nozzle1 piraso3
3
Dispersion tube
Dispersion tube
Fix a dispersion tube in the top, near the centre, reaching down to about half the tank's height. Its upper end opens into the valve chamber below the seat; its lower end carries a fixed cap with a minute inlet port.
Mga materyales para sa hakbang na ito:
Tubong pangkalat na may takip ng pasukan1 piraso4
4
Valves and nozzle
Valves and nozzle
Screw the needle control valve into the valve boss through a packing gland and nut, and fit the adjusting cap. Fix the nozzle pipe on the nozzle boss with a crown nut, angled back about thirty degrees to the tank. Mount the spring-loaded ball check valve in its casing in the top and close it with the sealing plug.
Mga materyales para sa hakbang na ito:
Balbulang karayom na pangkontrol1 piraso
Nozzle ng sulô at tubo ng nozzle1 piraso
Balbulang pantsek na may bola1 pirasoMga kailangang kasangkapan:
Llaveng ingles5
5
Charge with propane
Charge with propane
Remove the sealing plug and connect the supply bottle: liquid propane flows in through the check valve. Fill to no more than half the tank. With the control valve open while charging, liquid spitting from the nozzle shows the level has reached the dispersion tube's end. Replace the plug.
Mga materyales para sa hakbang na ito:
Propane1 as requiredMga kailangang kasangkapan:
Llaveng inglesMga Materyales
7- Placeholder
- Placeholder
- Placeholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 as requiredPlaceholder
Mga Kinakailangang Kasangkapan
3- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

