Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Refined Iron-Rich Clay Slip: the Finest Fraction Settled Out for Black Gloss
The black gloss of Greek vases is a slip of the same iron-rich clay as the pot, made only of its finest particles. Fired in three stages, oxidising, reducing and reoxidising, it stays glossy black while the body turns back to red. Stir the clay in water, let the coarse part settle, and keep only the finest.
The picture: our diagram, clay in water, coarse settled, fine slip kept.
Katamtaman
About a week
Mga Tagubilin
1
1
Slake
Slake
Break the dry clay small and soak it in plenty of water in a tub until it falls apart. Stir it thin and sieve out grit.
Mga materyales para sa hakbang na ito:
Luwad na terracotta5 kgMga kailangang kasangkapan:
Batyang kahoy
Tubig
Sagwan na kahoy
Pinong Bithay
Timbangang panimbang2
2
Settle and pour off
Settle and pour off
Let it stand until the coarse part has settled, then pour off the still-cloudy water into a clean bucket, leaving the sediment.
Mga kailangang kasangkapan:
Batyang kahoy
Balde3
3
Repeat
Repeat
Let the poured-off water settle again and pour off once more; each round keeps only finer particles. Stop after two or three rounds.
Mga kailangang kasangkapan:
Balde4
4
Thicken
Thicken
Let the last bucket stand for days until the fine clay settles, pour off the clear water and keep the thick slip covered.
Mga kailangang kasangkapan:
Balde
Garapong Salamin5
5
How much is fine enough?
How much is fine enough?
Naglo-load ng Jupyter notebook…
Mga Materyales
1- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.



