Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Reformate: Straight-Run Naphtha over Platinum-Alumina-Fluorine Catalyst at 874 °F and 500 psi (Haensel, UOP, US 2,479,110)
Charlie

Nilikha ni

Charlie

29. Oktubre 2026DE
6
0
0
0
0

Reformate: Straight-Run Naphtha over Platinum-Alumina-Fluorine Catalyst at 874 °F and 500 psi (Haensel, UOP, US 2,479,110)

Straight-run naphtha knocks badly in an engine. Passed hot and under pressure over Haensel's platinum catalyst, its molecules are reshaped into aromatics and smaller ones, and the octane number nearly doubles. Result (Ex. I): a Pennsylvania naphtha of octane 41.8 gave 82.5 % by volume of reformate of octane 78.8 (A.S.T.M. motor method). Variable: reforming temperature. At 824 °F: 95.9 % by weight, octane 65.7, too cool. At 874 °F: 83.2 %, octane 78.8; more of the charge goes to gas. Source: Haensel, US 2,479,110 (1949), Ex. I-II. Not given: reactor size, how the products are fractionated. Hot hydrogen and oil vapour under pressure: fire risk. Picture drawn by Youblob.
Dalubhasa
1 day

Mga Tagubilin

1

Pack the catalyst in a fixed bed

Put the platinum reforming catalyst in the reaction zone as a fixed bed. The oil is passed through it, upward or downward.

Mga kailangang kasangkapan:

Platinum na Reforming CatalystPlatinum na Reforming Catalyst
Fixed-bed na tubular reactorFixed-bed na tubular reactor
2

Feed a straight-run naphtha

Use a straight-run naphtha. Haensel's: a Pennsylvania naphtha boiling from 226 to 350 °F, with an A.S.T.M. motor octane number of 41.8.

Mga materyales para sa hakbang na ito:

NaphthaNaphtha1 as required

Mga kailangang kasangkapan:

Tangke ng langisTangke ng langis
3

Start with hydrogen

The reaction can make enough hydrogen for itself, but the patent prefers to bring hydrogen in from outside at the start and then recycle it, so the reaction zone always holds enough.

Mga kailangang kasangkapan:

HaydrohenoHaydroheno
Tangke ng gas na may presyonTangke ng gas na may presyon
4

Reform at 874 °F, 500 psi

Pass the naphtha over the catalyst at about 874 °F and 500 pounds per square inch, at a weight hourly space velocity of about 2: twice the catalyst's weight in oil each hour.

Mga kailangang kasangkapan:

Fixed-bed na tubular reactorFixed-bed na tubular reactor
Platinum na Reforming CatalystPlatinum na Reforming Catalyst
Panukat ng DiinPanukat ng Diin
5

Fractionate off the hydrogen, collect the reformate

Fractionate the products to separate the hydrogen, which goes back into the process, and recover the reformate: 82.5 % by volume of the charge, octane 78.8. Ours: a fractionating still.

Mga kailangang kasangkapan:

Alambike ng paghati-hatiAlambike ng paghati-hati
Tangke ng gas na may presyonTangke ng gas na may presyon
Tangke ng langisTangke ng langis

Mga Materyales

1
  • 1 as required
    Placeholder

Mga Kinakailangang Kasangkapan

7

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...