SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Rocking-Stool Churn: Rock the Churn, the Dashers Ride With It
A churn worked by a dasher or crank needs a strong arm for half an hour.
Enoch Thomas of Harrisonburg, Virginia, received US 753, dated 30 May 1838, for a rocking churn: a rectangular or curved churn of tin or wood fastened on a stool with four legs resting on rockers, two dashers "perforated with holes, or ... made in the form of a balustrade" set in grooves so they move with it, and a vent or wire gauze over the opening. "A small child or adult may then rock the churn as an amusement, and the butter will be quickly produced."
This rung works out the rocking pace, then prints the perforated dashers and gauze vent, builds the churn on a rocking stool, and makes butter.
Baguhan
About 3 hours, plus printing
Mga Tagubilin
1
1
Butter yield and rocking pace
Butter yield and rocking pace
Naglo-load ng Jupyter notebook…
2
2
The churning it does
The churning it does
The embedded blueprint makes butter by agitating cream. Thomas lets rocking do the agitating.
3
3
Read US 753
Read US 753
"Among the many advantages which my churn possesses over others is, that it gathers the butter sooner and more easily than any other churn. This cannot be done, however, so well with dashers immovable. They must be taken out in order to collect the butter and one inserted in the middle."
4
4
Print the dashers and vent
Print the dashers and vent
Print two perforated dashers (/uploads/blueprints/rocking-stool-churn-dasher.stl) and the gauze vent (/uploads/blueprints/rocking-stool-churn-vent.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Mga materyales para sa hakbang na ito:
PETG filament1 pirasoMga kailangang kasangkapan:
Limbagang 3D na FDM5
5
Make the churn
Make the churn
Take a food-safe storage box about 180 × 90 × 110 mm. Glue pairs of plywood strips inside both sides at one and two thirds of its length as grooves for the dashers. Cut a 26 mm hole in the lid and press the vent into it.
Mga materyales para sa hakbang na ito:
Lalagyang HDPE1 piraso
Plantsa ng playwud1 piraso
Silicone Sealant1 pirasoMga kailangang kasangkapan:
Lagaring Pangkurba
Set ng hole saw
Walang-Kableng Barena6
6
Build the rocking stool
Build the rocking stool
Make a plywood stool top the size of the box on four legs 50 mm long, and screw two rockers cut to a 400 mm radius across the legs. Strap the box to the top.
Mga materyales para sa hakbang na ito:
Plantsa ng playwud1 piraso
Tipak ng Matigas na Kahoy1 piraso
Turnilyong pangkahoy #8 x 1"1 pirasoMga kailangang kasangkapan:
Lagaring PangkurbaWalang-Kableng Barena
Hanay ng Talim ng Barena
Set ng mga distornilyador7
7
The patent drawing
The patent drawing
US 753 drawing sheet, public domain (expired patent).
8
8
Rock and gather
Rock and gather
Let 500 ml of heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour it in, fit the lid and rock steadily; time until the butter comes. Then take both dashers out, set one in the middle, and rock slowly to gather it, as he did. Pour off the buttermilk, add cold water, churn a few turns and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Mga materyales para sa hakbang na ito:
Makapal na krema500 ml
Magaspang na Asin sa Dagat1 piraso
Tubig1 pirasoMga kailangang kasangkapan:
Termometro na naiiwang nakatusok
Panukat ng Oras
Digital na Timbangang Pangkusina
Malaking mangkok na panghalo na asero na hindi kinakalawang9
9
A churn that tips, splashes or will not come
A churn that tips, splashes or will not come
Rocking-stool churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Enoch Thomas** of Harrisonburg, Rockingham County, Virginia, received US 753, dated 30 May 1838. If the churn is small, one dasher may suffice; the lid may be left off for air, or the top made flat and covered with wire gauze to keep out flies; the churn is easily cleaned by pouring off the buttermilk, throwing in water and rinsing. He claimed the gauze covering.
**Honest limits.** A storage box and printed dashers stand in for his tin or wooden churn. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Mga Materyales
9- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 500 mlPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
10- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.