SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Planar (Double-Gauss) Lens
Mary

Nilikha ni

Mary

22. Setyembre 2026FI
0
0
0
0
0

Planar (Double-Gauss) Lens

Carl Friedrich Gauss had designed a telescope objective of two air-spaced lenses - a crown meniscus and a flint lens with differently curved facing surfaces - that corrected spherical aberration for two colours at once. Paul Rudolph at Zeiss turned it into a camera lens: two such groups placed symmetrically either side of the stop, each group achromatised with a cemented pair of glasses of nearly the same refractive index but different dispersion. **US 583,336**, "Object-glass", Rudolph, assigned to Carl Zeiss, filed 1. February 1897, granted 25. May 1897. Descendants of this double-Gauss layout became the standard fast normal lens for most of the twentieth century. **You test what the symmetry buys**: a grid imaged through a single lens with the stop in front, with it behind, and through a symmetric pair with the stop in the middle.
Katamtaman
2 hours

Mga Tagubilin

1

Make a stop

Cut a 60 mm disc of black card with a 6 mm round hole in its centre. Mount it in a lens holder.

Mga materyales para sa hakbang na ito:

Makapal na kartong itimMakapal na kartong itim1 pilyego

Mga kailangang kasangkapan:

Kutsilyong Pang-arteKutsilyong Pang-arte
Set ng hawakan ng lenteSet ng hawakan ng lente
2

Light a grid

Tape graph paper over a torch or a bright window 1 m from the bench. Tracing paper on a holder is the screen.

Mga materyales para sa hakbang na ito:

Papel na GrapPapel na Grap1 pilyego
Rolyo ng papel na pantunton ng patronRolyo ng papel na pantunton ng patron1 pilyego
Teyp na pantakipTeyp na pantakip1 rolyo

Mga kailangang kasangkapan:

Lampara ng LED na pansuriLampara ng LED na pansuri
Optical bench at rilesOptical bench at riles
3

Stop in front, then behind

One 100 mm convex lens with the stop 25 mm in front of it: focus the grid and measure the width of the middle row and the top row across the same squares. Move the stop 25 mm behind the lens and measure again.

Mga materyales para sa hakbang na ito:

Set ng kumbeksong lenteSet ng kumbeksong lente1 set

Mga kailangang kasangkapan:

Panukat na AseroPanukat na Asero
4

Make it symmetric

Add a second identical lens so the stop sits exactly midway between them, 25 mm each side. Refocus and measure the same two widths.

Mga kailangang kasangkapan:

Panukat na AseroPanukat na Asero
Panukat na TapePanukat na Tape
5

Distortion from your widths

Naglo-load ng Jupyter notebook…
6

History & Context

**What the patent specifies:** Gauss-type objectives made anastigmatic and achromatised by cemented components of nearly equal refractive index but different dispersion, used as a doublet about a central stop. **Modern build (derived):** two identical stock lenses about a card stop. The Planar was too prone to flare with uncoated glass; once anti-reflection coatings arrived, double-Gauss lenses became the classic 50 mm f/2 and faster. Its limits: many air-glass surfaces, and a design that needs careful glass choice to go wide.
Hakbang 6 - Image 1

Mga Materyales

5

Mga Kinakailangang Kasangkapan

6

Kaugnay na Blueprint

Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...