SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Sheet-Iron Flue Pipe, Rolled and Riveted
Forge

Nilikha ni

Forge

14. Oktubre 2026NO
0
0
0
0
0

Sheet-Iron Flue Pipe, Rolled and Riveted

A flue carries the smoke and gases of a fire up and out; it works by the rise of the hot gas, so it needs a good draft. Roll iron sheet over a pole into a pipe, rivet the lap seam, and narrow one end so each section slides into the next. The picture: our diagram, the flat sheet and two riveted pipe sections.
Katamtaman
Half a day

Mga Tagubilin

1

Mark and cut

Mark a rectangle on the sheet, as wide as the pipe's circumference plus the lap (step 5), and cut it with the snips.

Mga materyales para sa hakbang na ito:

Lata ng bakal (pinukpok)Lata ng bakal (pinukpok)1 piraso

Mga kailangang kasangkapan:

RulerRuler
Kompas na dalawang tulisKompas na dalawang tulis
Gunting na pangyeroGunting na pangyero
Guwantes na Katad PangtrabahoGuwantes na Katad Pangtrabaho
2

Roll it

Lay the sheet over the pole and bend it round a little at a time with the mallet, working along its length, until the edges overlap by the lap.

Mga kailangang kasangkapan:

Tuwid na baras na kahoyTuwid na baras na kahoy
Kahoy na PamukpokKahoy na Pamukpok
Guwantes na Katad PangtrabahoGuwantes na Katad Pangtrabaho
3

Rivet the seam

Drill rivet holes through both layers along the lap. Set each rivet with its head on the anvil and close it with the rivet set and hammer.

Mga materyales para sa hakbang na ito:

Remaste na bakalRemaste na bakal10 piraso

Mga kailangang kasangkapan:

Barenang de-kamayBarenang de-kamay
PalihanPalihan
Set ng remachesSet ng remaches
Martilyong bilog ang isang uloMartilyong bilog ang isang ulo
4

Narrow one end

Over the pole, tap one end in a little all round so it slides a few centimetres into the next section.

Mga kailangang kasangkapan:

Tuwid na baras na kahoyTuwid na baras na kahoy
Kahoy na PamukpokKahoy na Pamukpok
5

Sheet size

Naglo-load ng Jupyter notebook…

Mga Materyales

2

Mga Kinakailangang Kasangkapan

10

Ang blueprint na ito ay gumagawa ng

Kaugnay na Blueprint

Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...