Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Silver Conductive Paint: Silver Powder in Methacrylate Resin and Acetone, Dried at 25-75 °C (NBS Circular 468, 1947)
Ed

Nilikha ni

Ed

28. Oktubre 2026FI
16
0
0
0
0

Silver Conductive Paint: Silver Powder in Methacrylate Resin and Acetone, Dried at 25-75 °C (NBS Circular 468, 1947)

A silver paint that conducts once it dries at room heat, with no firing, so it can go on plastics and be used to fix leads and draw conductors. Fine silver powder is held in methacrylate resin dissolved in acetone. Source: Brunetti and Curtis, Printed Circuit Techniques, NBS Circular 468 (1947), Table 2, the column for thermoplastic plastics: 70 % silver powder, 20 % methacrylate or polystyrene resin, 10 % ketones, benzene, toluene or ethylene dichloride, dried at 25 to 75 °C. This is the methacrylate (acrylic) version. Ours: precipitated silver ground fine as the silver powder, and acetone of the four solvents. Picture drawn by Youblob.
Baguhan
1 day

Mga Tagubilin

1

Dissolve 20 g methacrylate resin in 10 g acetone

For 100 g of paint: put 20 g methacrylate resin and 10 g acetone in a jar, close it and let the resin dissolve, stirring now and then. Ours: acetone, one of the four solvents NBS names. Fumes: work in the open air, gloves and goggles.

Mga materyales para sa hakbang na ito:

Butil na akrilikButil na akrilik20 g
AcetoneAcetone10 g

Mga kailangang kasangkapan:

Timbangang panimbangTimbangang panimbang
Garapong SalaminGarapong Salamin
Baras na Salaming BorosilicateBaras na Salaming Borosilicate
Gwantes na NitrileGwantes na Nitrile
Salamin Laban sa Tilamsik ng KemikalSalamin Laban sa Tilamsik ng Kemikal
2

Grind 70 g silver powder fine and stir it in

Grind 70 g silver powder fine and stir it into the resin solution until even. NBS asks for at least 50 % silver for a brushed paint; this one has 70 %. Ours: precipitated silver as the powder.

Mga materyales para sa hakbang na ito:

Pinaulang pilakPinaulang pilak70 g

Mga kailangang kasangkapan:

Timbangang panimbangTimbangang panimbang
Almires at PanghaloAlmires at Panghalo
Baras na Salaming BorosilicateBaras na Salaming Borosilicate
3

Stir well, keep the jar closed

Stir the paint thoroughly before each use, and keep the jar closed so the solvent does not evaporate and thicken it.

Mga kailangang kasangkapan:

Garapong SalaminGarapong Salamin
Baras na Salaming BorosilicateBaras na Salaming Borosilicate
4

Brush on and dry at 25 to 75 °C

Brush the paint on and dry it at 25 to 75 °C to drive out the solvent. It then conducts. Brushing is ours; NBS also names spraying and screen stencils.

Mga kailangang kasangkapan:

Mga pinong pinselMga pinong pinsel
Hurnong pantuyoHurnong pantuyo
Termometro ng HurnoTermometro ng Hurno

Mga Materyales

3

Mga Kinakailangang Kasangkapan

9

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...