Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Sodium Pyrophosphate: Disodium Phosphate Heated to 300 °C
Sodium pyrophosphate is a white salt that dissolves to an alkaline solution. Thorpe's Dictionary (1913) makes it in two easy stages: neutralise phosphoric acid with soda until alkaline and crystallise disodium phosphate, then heat the dried salt to 300 °C, when it gives off water and turns into the pyrophosphate.
The picture: our diagram.
Baguhan
1 day
Mga Tagubilin
1
1
Phosphoric acid and soda
Phosphoric acid and soda
Add sodium carbonate to phosphoric acid diluted with water until the solution is alkaline. Filter.
Mga materyales para sa hakbang na ito:
Phosphoric acid (85 %)1 piraso
Karbonatong Sodyo (abo ng soda)1 pirasoMga kailangang kasangkapan:
Distiladong Tubig
Papel na panukat ng pH
Basong Salamin na Matibay sa Init
Embudong Salamin na May Tangkay
Papel na Pansala
Salamin Laban sa Tilamsik ng Kemikal
Gwantes na goma2
2
Crystallise disodium phosphate
Crystallise disodium phosphate
Concentrate and let it crystallise: large clear prisms of disodium phosphate. Dry them at about 45 °C until they lose their water.
Mga kailangang kasangkapan:
Platong Pansingaw
Pang-init na Plato3
3
Heat to 300 °C
Heat to 300 °C
Heat the dry salt to 300 °C: it gives off water and turns completely into sodium pyrophosphate, a white glassy mass.
Mga kailangang kasangkapan:
Krisol
Muffle furnace
Guwantes na Matibay sa InitMga Materyales
2- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
12- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

