SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Spray-Jet Dishwasher Arm
Martin

Nilikha ni

Martin

22. Setyembre 2026NO
50
0
0
0
0

Spray-Jet Dishwasher Arm

Josephine Cochrane's machine, already published, held the dishes in wire racks and threw water at them from fixed jets while the rack was turned. Robert Tatham's rung makes the water do the moving: jets angled off the radius push the arm round, so a pump and one moving part wash a stationary load from every direction. **US 1,900,529**, "Dishwasher", Robert L. Tatham, filed 29. June 1929, granted 7. March 1933: apparatus for "washing dishes by discharging water with considerable force, in the form of jets or sprays", delivered by a pump. Every domestic dishwasher since has a reaction-driven spray arm. **You build the arm** from PVC pipe on a bearing, fed by a submersible pump, and measure its speed and how much of a dirty plate it actually cleans.
Katamtaman
3 hours

Mga Tagubilin

1

Drill the arm

Cap both ends of a 200 mm length of 20 mm PVC pipe. Drill six 2 mm holes along it, three each side of centre, all angled about 20 degrees off straight-out and all the same way round.

Mga materyales para sa hakbang na ito:

Tubong PVCTubong PVC1 piraso
Sari-saring Kabit ng Tubong PVCSari-saring Kabit ng Tubong PVC1 set

Mga kailangang kasangkapan:

Walang-Kableng BarenaWalang-Kableng Barena
Hanay ng Talim ng BarenaHanay ng Talim ng Barena
RulerRuler
2

Hang it on a bearing

Fit a ball bearing at the arm's centre on a short stub of pipe so it spins freely, and connect the pump to the stub with vinyl tubing. Keep the tubing slack so it cannot drag.

Mga materyales para sa hakbang na ito:

Ball BearingBall Bearing1 piraso
Malinaw na tubong binilMalinaw na tubong binil1 metro

Mga kailangang kasangkapan:

Baril ng mainit na pandikitBaril ng mainit na pandikit
3

Measure the flow

Run the pump into a graduated cylinder for 15 seconds and work out litres per minute. Do it again with the pump half-throttled by pinching the tube.

Mga kailangang kasangkapan:

Bombang panubig na isinasawsawBombang panubig na isinasawsaw
BaldeBalde
Silindrong may sukatanSilindrong may sukatan
Panukat ng OrasPanukat ng Oras
4

Dirty a plate

Paint a ceramic plate with a paste of flour and food colouring and let it dry hard. Stand it in the bucket above the arm.

Mga materyales para sa hakbang na ito:

Karaniwang harinaKaraniwang harina50 g
Kulay pangpagkainKulay pangpagkain5 ml

Mga kailangang kasangkapan:

Bandehang seramikoBandehang seramiko
5

Run, count, compare

Run for one minute, counting arm revolutions in 30 seconds. Photograph the plate and estimate the share cleaned. Repeat with the arm locked still, and at half flow.

Mga kailangang kasangkapan:

Panukat ng OrasPanukat ng Oras
Teyp na pantakipTeyp na pantakip
6

Reaction speed and coverage

Naglo-load ng Jupyter notebook…
7

History & Context

**What the patent specifies:** washing by forceful jets or sprays delivered by a pump against dishes held in a tray. **Modern build (derived):** a reaction-driven PVC arm and an aquarium pump. Later machines added a second arm above, a heater to keep the wash hot, and a detergent dispenser timed to the cycle. Its limits: a jet cannot clean what it cannot reach, so loading matters; burnt-on food still needs soaking; and the arm stalls if cutlery drops through the rack.
Hakbang 7 - Image 1

Mga Materyales

6

Mga Kinakailangang Kasangkapan

10

Kaugnay na Blueprint

Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...