Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Type 304 Stainless Steel: Arc-Melted, AOD-Refined and Cast into Blooms and Slabs
Forge

Nilikha ni

Forge

17. Oktubre 2026NO
11
0
0
0
0

Type 304 Stainless Steel: Arc-Melted, AOD-Refined and Cast into Blooms and Slabs

Stainless steel is steel with at least 10.5 % chromium, which forms a thin protective oxide film; type 304 (18/8, 1912) adds nickel. Melt steel with ferrochrome and ferronickel in an electric arc furnace, take the carbon out with argon and oxygen in an AOD converter, and cast it continuously into blooms for bars and wire or slabs for sheet. The picture: our diagram of the route.
Abantado
Factory process

Mga Tagubilin

1

Melt the charge

Melt steel together with ferrochrome and ferronickel in the electric arc furnace, aiming at about 18 % chromium and 8 % nickel.

Mga materyales para sa hakbang na ito:

Bloke ng aseroBloke ng asero1 piraso
FerokromoFerokromo1 as required
FeronikelFeronikel1 as required

Mga kailangang kasangkapan:

Pugon na de-kuryenteng arkoPugon na de-kuryenteng arko
2

Refine in the AOD converter

Pour into a ladle and transfer to the AOD converter. Blow argon and oxygen through the melt to burn the carbon out as carbon monoxide, and adjust the composition by analysis.

Mga kailangang kasangkapan:

Sandok ng pagbububo ng metalSandok ng pagbububo ng metal
Konberter na AODKonberter na AOD
ArgonArgon
OksihenoOksiheno
3

Cast it continuously

Ladle, tundish, water-cooled mould, spray chamber and withdrawal rolls, as for billets.
4

Cast blooms or slabs

Cast blooms, about 25 × 25 cm, for bars and wire rod; or slabs, about 20 cm thick, for sheet. Cut to length with the torch.

Mga kailangang kasangkapan:

TundishTundish
Tansong hulmahang pinalalamig ng tubigTansong hulmahang pinalalamig ng tubig
Silid ng pag-spray na may mga roller na pansuportaSilid ng pag-spray na may mga roller na pansuporta
Mga roller na pantuwid at panghilaMga roller na pantuwid at panghila
Oxyacetylene na sulô na pamutolOxyacetylene na sulô na pamutol
5

The 18/8 target

Naglo-load ng Jupyter notebook…

Mga Materyales

3
  • Placeholder
  • 1 as required
    Placeholder
  • 1 as required
    Placeholder

Mga Kinakailangang Kasangkapan

10

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...