SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Steel Rolling: Plate, Sheet and Coil
Mills turn steel slabs into plate, sheet and coil by rolling: the hot slab is squeezed between rolls, thinner each pass; plate is cut off thick, strip is rolled on down and wound into a coil. Coils are then cleaned of scale and cold-rolled thinner and smoother, annealed soft again, and wound back into coils for stamping presses and fabricators. Over about 6 mm is plate, under is sheet. The hand-hammered plate blueprint does the same job by hand at a tiny scale.
Abantado
Hours per coil (industrial)
Mga Tagubilin
1
1
Cast slabs
Cast slabs
Steel from the converter is cast into thick slabs.
Mga materyales para sa hakbang na ito:
Bloke ng asero1000 kg2
2
Hot roll
Hot roll
Each slab is reheated and passed through the hot mill's stands; thick product is cut off as plate.
Mga kailangang kasangkapan:
Makinang panipis ng metal3
3
Coil the strip
Coil the strip
Thinner strip runs on through the finishing stands and is wound into a hot-rolled coil.
Mga kailangang kasangkapan:
Makinang panipis ng metal4
4
Clean and cold roll
Clean and cold roll
The coil is uncoiled, cleaned of scale, cold-rolled thinner and smoother, and recoiled.
Mga kailangang kasangkapan:
Makinang panipis ng metal5
5
Anneal and measure
Anneal and measure
Cold-rolled coil is annealed soft, its thickness measured, and sold as coil or cut into sheets.
Mga kailangang kasangkapan:
Pugon ng pagpapalambot
Digital na Kalibrador 6 PulgadaMga Materyales
1- 1000 kgPlaceholder
Mga Kinakailangang Kasangkapan
3- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.