Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Sterling Silver Sheet: 925 Alloy Cast and Rolled
Sterling is 92.5 % silver and 7.5 % copper: the copper makes soft fine silver hard enough to wear. Melt the two together, pour an ingot, and roll it down to sheet, annealing it whenever it stiffens: heat to a dull red and quench in water.
The picture: our diagram, ingot to sheet.
Katamtaman
Half a day
Mga Tagubilin
1
1
Weigh out 925
Weigh out 925
Weigh fine silver and copper in the ratio 92.5 to 7.5 (see the notebook).
Mga materyales para sa hakbang na ito:
Purong Pilak92.5 g
Lingote ng Tanso7.5 gMga kailangang kasangkapan:
Digital na Timbangang Pangkusina2
2
Melt and pour
Melt and pour
Melt them together in a crucible with the torch, stir, and pour into an ingot mould.
Mga kailangang kasangkapan:
Krisol
Sulô ng Propano
Sipit ng Krisol
Hulmahan ng lingote
Mga guwantes sa paghihinang
Salaming pangkaligtasan3
3
Anneal
Anneal
Heat the ingot to a dull red and quench it in water.
Mga materyales para sa hakbang na ito:
Tubig5 litroMga kailangang kasangkapan:
Sulô ng Propano
Timbang pampatigas
Sipit ng Krisol4
4
Roll to sheet
Roll to sheet
Roll it through the mill a little at a time, annealing again whenever it gets stiff, until it is as thin as you need.
Mga kailangang kasangkapan:
Makinang panipis ng metal
Sulô ng Propano
Timbang pampatigas
Digital na Kalibrador 6 Pulgada5
5
Weighing out 925
Weighing out 925
Naglo-load ng Jupyter notebook…
Mga Materyales
3- 92.5 gPlaceholder
- 7.5 gPlaceholder
- 5 litroPlaceholder
Mga Kinakailangang Kasangkapan
10- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

