SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Strain-Gauge Load Cell with Floating Piston: Ruge, 1949
Arthur C. Ruge of Cambridge, Massachusetts, one of the two inventors of the bonded wire strain gauge, patented this load weighing cell in 1949, US 2,472,047 (filed 1946). Tanks, bins and scales rest on such cells so the weight of their contents can be read at any time. A floating piston, held in a heavy shell by two diaphragms, passes the load straight down onto a column carrying bonded strain gauges, so tilted, off-centre and twisting loads barely affect the reading. The gauges' change of resistance can be read on a Wheatstone bridge.
Abantado
Workshop process
Mga Tagubilin
1
1
Base and shell
Base and shell
Weld a rigid, preferably cylindrical shell to a relatively heavy base, or secure it some other way.
Mga materyales para sa hakbang na ito:
Base at Silindrong Kaha ng Load Cell1 pirasoMga kailangang kasangkapan:
Makinang panghinang na arko2
2
Load column and gauges
Load column and gauges
Screw the lower end of the load-sensitive column rigidly to the base; round its upper end to a half-sphere. Bond wire strain gauges to its surface at several points around it, so bending cancels out, and mount gauges of the same type crosswise for temperature compensation. The column may be round, but square, solid or hollow, makes the gauges easier to apply. Its capacity is set by its cross-section and the stiffness of its material.
Mga materyales para sa hakbang na ito:
Haliging Sensitibo sa Karga1 piraso
Nakadikit na Kawad na Panukat ng Pagbanat1 setMga kailangang kasangkapan:
Set ng mga distornilyador3
3
Floating piston
Floating piston
Bore the piston so the column reaches up inside it and its rounded end bears on the end of the bore. Centre the piston in the shell with two annular diaphragms, upper and lower, welded or brazed to piston and shell: widely spaced, they let it move freely up and down but resist side loads and off-centre loads.
Mga materyales para sa hakbang na ito:
Lumulutang na Piston ng Karga1 piraso
Hugis-singsing na Gabay na Dayapragm2 pirasoMga kailangang kasangkapan:
Torno para sa MetalMakinang panghinang na arko4
4
Overload ring and leads
Overload ring and leads
Set a safety ring under the piston with a small clearance: past a safe load, the piston lands on it and the excess goes straight to the base. Bring the gauge leads down through a hole in the ring and out through the lower diaphragm to an external cable. The gauges may be wired as a Wheatstone bridge. The cell can be sealed all round by brazing, or potted.
Mga materyales para sa hakbang na ito:
Singsing na Pangkaligtasan Laban sa Labis na Karga1 piraso
Kableng maraming konduktor1 piraso
Kawad na Panghinang1 as requiredMga kailangang kasangkapan:
De-kuryenteng Kautin
Pambalat ng kawad5
5
Zero check
Zero check
To read the zero without moving the tank, seat a fixed ball race on top of the shell and a turning race above it, with balls between on a slightly inclined cam surface and a second row of balls under the loaded surface. Turning the upper race with a bar or spanner lifts the load a few thousandths of an inch off the piston; read the bridge, then turn it back.
Mga materyales para sa hakbang na ito:
Pares ng Daanan ng Bola na may Kam1 piraso
Mga bearing na bolang asero1 setMga kailangang kasangkapan:
Llaveng inglesMga Materyales
10- Placeholder
- 1 pirasoPlaceholder
- Placeholder
- 1 pirasoPlaceholder
- Placeholder
- Placeholder
- 1 pirasoPlaceholder
- 1 as requiredPlaceholder
- Placeholder
- Placeholder
Mga Kinakailangang Kasangkapan
6- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.