Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Strontium Ferrite Disc Magnet: 1 : 10 Strontium to Iron Oxide, 1280 °C (Went, Philips 1956, Ex. 26)
Charlie

Nilikha ni

Charlie

28. Oktubre 2026DE
3
0
0
0
0

Strontium Ferrite Disc Magnet: 1 : 10 Strontium to Iron Oxide, 1280 °C (Went, Philips 1956, Ex. 26)

A strontium ferrite with much more iron oxide: 0.1 mol strontium carbonate to 1 mol, made as in Example 25 but passed through a 1280 °C furnace in 10 minutes. Went's rod held 1,200 gauss with a coercive force of 3,610 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 26. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
Abantado
2 days

Mga Tagubilin

1

Weigh strontium carbonate and iron oxide

Weigh 14.76 g strontium carbonate (0.1 mol) and 159.7 g ferric oxide (1 mol).

Mga materyales para sa hakbang na ito:

Strontium carbonateStrontium carbonate14.76 g
Ferric oxideFerric oxide159.7 g

Mga kailangang kasangkapan:

Timbangang panimbangTimbangang panimbang
Panala sa Hininga na P100Panala sa Hininga na P100
2

Mill, presinter and mill as in Example 25

As in Example 25: grind with alcohol 7 hours, dry at 110 °C, fire in air at 1000 °C for 4 hours, grind again and dry.

Mga kailangang kasangkapan:

Gilingang Bolang BakalGilingang Bolang Bakal
Etanol - antas laboratoryo, 95 %Etanol - antas laboratoryo, 95 %
Hurnong pantuyoHurnong pantuyo
Muffle furnaceMuffle furnace
Krisol na may takip (porselana)Krisol na may takip (porselana)
Sipit ng KrisolSipit ng Krisol
3

Press at 1.5 t/cm²

Press at 1.5 tonnes per cm² (ours: discs).

Mga kailangang kasangkapan:

Haydroliko na pandiinHaydroliko na pandiin
Hulmahan sa pagpindot ng diskHulmahan sa pagpindot ng disk
4

Pass through a 1280 °C zone in 10 minutes

Sinter at 1280 °C by passing the pieces through a 10 cm hot zone at 10 mm per minute: 10 minutes in the heat.

Mga kailangang kasangkapan:

Hurnong TuboHurnong Tubo
Guwantes na Matibay sa InitGuwantes na Matibay sa Init
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

Mga kailangang kasangkapan:

ElektromagnetoElektromagneto
KompasKompas

Mga Materyales

2

Mga Kinakailangang Kasangkapan

14

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...