SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Tannin Mordant Extracted from Oak Galls
Oak galls are rich in tannin (gallotannic acid). Tannin is a common mordant for cotton and linen: the fibre is tanned first, then metal mordants and dyes bind to it. Crush the galls, steep them in hot water, strain, and dry the liquid down to a brown powder.
The picture: young marble galls on an oak.
Baguhan
Two days
Mga Tagubilin
1
1
Crush the galls
Crush the galls
Weigh the dry galls and pound them to a coarse powder in the mortar.
Mga materyales para sa hakbang na ito:
Mga bukol ng roble200 gMga kailangang kasangkapan:
Timbangang panimbang
Almires at Panghalo2
2
Steep hot
Steep hot
Cover the powder with water in a pot and keep it hot, not boiling, for an hour or two. Leave it overnight.
Mga materyales para sa hakbang na ito:
Tubig2 litroMga kailangang kasangkapan:
Malaking Kaldero3
3
Strain
Strain
Strain the brown liquid through cloth and squeeze the residue. Steep the residue once more and add that liquid.
Mga materyales para sa hakbang na ito:
Tubig1 litroMga kailangang kasangkapan:
Katsa (cheesecloth)
Malaking Kaldero4
4
Dry to powder
Dry to powder
Boil the liquid down, then finish drying it in a shallow dish on the sand bath. Scrape it off, grind it fine and keep it in a closed jar.
Mga kailangang kasangkapan:
Malaking Kaldero
Platong Pansingaw
Paliguan ng buhangin
Almires at Panghalo
Garapong Salamin5
5
Yield
Yield
Naglo-load ng Jupyter notebook…
Mga Kinakailangang Kasangkapan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

