SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

The Gas Turbine: When the Turbine Finally Beat Its Own Compressor
Compress air, burn fuel in it, and expand the hot gas through a turbine that also turns the compressor. The idea is simple and old. Making it work took until 1903, when the Norwegian engineer Ægidius Elling ran the first gas turbine that delivered more power than its own compressor consumed.
The difficulty is arithmetic. The compressor takes most of what the turbine makes, so small losses in either machine wipe out the net output entirely. It needed efficient compressors and turbine metal that could stand red heat — and the Whittle turbojet in this catalogue is the result.
This rung works out the arithmetic, then demonstrates it safely with an air turbine and a compressor on the bench.
Katamtaman
About 3 hours
Mga Tagubilin
1
1
Net work: turbine minus compressor
Net work: turbine minus compressor
Naglo-load ng Jupyter notebook…
2
2
Demonstrate the energy bill with compressed air
Demonstrate the energy bill with compressed air
No combustion here. Print a small impulse air turbine — a 60 mm wheel with 20 cupped buckets — on the shaft of a hobby motor used as a generator, with a 330 Ω load and the multimeter across it. Blow it with the air compressor through the regulator and a nozzle made from a short piece of tube.
Measure the electrical power out (V² ÷ R). Then measure the power the compressor draws from the wall while it runs — the clamp meter on the live conductor, times the mains voltage.
The turbine returns a tiny fraction of what the compressor took. That is the gas turbine's problem without the fuel: compression is expensive, and only by adding heat between compressor and turbine does the turbine get back more than it cost.
Mga materyales para sa hakbang na ito:
PETG filament30 g
Motor na may gearbox1 piraso
Risistor na 330 ohm1 piraso
Malinaw na tubong binil0.5 metroMga kailangang kasangkapan:
Kompresor ng hangin
Regulator na pambawas ng presyon
Multimetro
Clamp meter AC/DC 600 A
Limbagang 3D na FDM
Malinaw na Salaming Pangkaligtasan
Pananggalang sa pandinig (earmuff, SNR 30 dB)3
3
History and context
History and context
**Ægidius Elling, Norway, 1903** — the first gas turbine to deliver net power — more than its own compressor consumed. No patent number is asserted here, and the details of his machine are left to the sources; the principle is the payload. Earlier attempts had failed exactly as the notebook predicts: the compressor ate all the turbine's output.
The line runs through Büchi's turbocharger (the next rung) — a gas turbine driving a compressor, fed by an engine's exhaust — to the Whittle turbojet and the power-station gas turbine.
**Honest limits.** Efficiency depends on turbine inlet temperature, which is limited by materials and cooling; small gas turbines are inefficient; and part-load efficiency falls away. **Do not build a combustion gas turbine**: the parts spin at speeds where a failure is a shrapnel event, and the combustor is a blowtorch.
Mga Materyales
4- 30 gPlaceholder
- Placeholder
- 1 pirasoPlaceholder
- 0.5 metroPlaceholder
Mga Kinakailangang Kasangkapan
7- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

Parsons Steam Turbine
ni Martin
Pisika
49
0
0
0
0
0

The Heat of Compression: Why Compressed Air Is Hot and Wet
ni Martin
Mekanika
35
0
0
0
0
0

The Screw Compressor: A Built-In Ratio, and the Cost of the Wrong One
ni Martin
Mekanika
36
0
0
0
0
0

The Rotary Regenerator: Store Heat in a Wheel and Carry It Across
ni Martin
Mekanika
36
0
0
0
0
0

The Sirocco Fan: Many Shallow Forward-Curved Blades
ni Emma
Mekanika
32
0
0
0
0
0
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.