SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush
Preston H. Clingan, Florence, Colorado · Public domain (expired patent)
Woody

Nilikha ni

Woody

6. Oktubre 2026NO
28
0
0
0
0

The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush

An oil can and a rag spill, and a brush dipped in oil drips. Preston H. Clingan of Florence, Colorado, received US 787,278, dated 11 April 1905, for "a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof": an open thimble hangs from the can's mouth to near its bottom, a rolled burlap wick inside it is frayed above the mouth into a brush, and oil in the chamber round the thimble reaches the wick from underneath. This rung works out how high a wick can lift oil, then builds the can from a jar, a tin and burlap and weighs the oil it lays on a board.
Baguhan
About 2 hours

Mga Tagubilin

1

How high the wick lifts

Naglo-load ng Jupyter notebook…
2

A wick that feeds oil before it

The embedded blueprint feeds oil to a bearing through a wick. Clingan turns the wick's frayed end into the brush.
3

Read US 787,278

"My object is to provide a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof. The can includes a wick of absorbent material, which is constantly supplied with oil or other fluid within the can."
4

Make the thimble

Remove both ends of a tin can that passes through the jar's mouth with 6 mm to spare. Cut it 10 mm shorter than the jar's inside height. File the cut edges.

Mga materyales para sa hakbang na ito:

LataLata1 piraso

Mga kailangang kasangkapan:

Gunting na pangyeroGunting na pangyero
Kikil (Kikil na Pangkamay)Kikil (Kikil na Pangkamay)
RulerRuler
Guwantes na Katad PangtrabahoGuwantes na Katad Pangtrabaho
5

Cut the lip ring

Cut an aluminium ring: outside to fit inside the jar's mouth, inside to fit round the thimble. Drill it 3 mm for a filling screw.

Mga materyales para sa hakbang na ito:

Plantsang aluminyoPlantsang aluminyo1 piraso

Mga kailangang kasangkapan:

Gunting na pangyeroGunting na pangyero
Walang-Kableng BarenaWalang-Kableng Barena
Hanay ng Talim ng BarenaHanay ng Talim ng Barena
Kikil (Kikil na Pangkamay)Kikil (Kikil na Pangkamay)
6

Fix the thimble

Epoxy the ring round the thimble's top and into the jar's mouth, the thimble hanging 10 mm clear of the floor. Cut a rubber washer for the filling screw.

Mga materyales para sa hakbang na ito:

Garapong SalaminGarapong Salamin1 piraso
Epoksing dalawang bahagiEpoksing dalawang bahagi1 piraso
Mga turnilyo ng makinaMga turnilyo ng makina1 piraso
Plantsa ng gomaPlantsa ng goma1 piraso

Mga kailangang kasangkapan:

Kutsilyong Pang-arteKutsilyong Pang-arte
Set ng mga distornilyadorSet ng mga distornilyador
7

Roll the wick

Roll a strip of burlap tightly until it fills the thimble, 15 mm longer than it. Push it in and fray the top 15 mm with the fingers.

Mga materyales para sa hakbang na ito:

Sako / hesyanSako / hesyan1 piraso

Mga kailangang kasangkapan:

GuntingGunting
RulerRuler
8

The build in 3D

FreeCAD model of this build, not of the patent: a 90 mm jar with a 66 mm mouth, the aluminium lip ring and filling screw, a 53 mm thimble 10 mm off the floor, the burlap wick with its frayed top, and the lid.
File ng DisenyoBLENDCC0 - Free
I-download ang modelo
9

Oil a board and weigh it

Pour linseed oil through the filling hole to half the jar's height and wait until the wick's top darkens. Weigh a plywood board, brush it once over, and weigh it again. Turn the closed jar on its side over a rag for a minute.
Hakbang 9 - Image 1

Mga materyales para sa hakbang na ito:

Pinakuluang Langis ng LinsidPinakuluang Langis ng Linsid1 piraso
Plantsa ng playwudPlantsa ng playwud1 piraso
Mga basahang bulakMga basahang bulak1 piraso

Mga kailangang kasangkapan:

Digital na Timbangang PangkusinaDigital na Timbangang Pangkusina
Panukat ng OrasPanukat ng Oras
Panukat na TapePanukat na Tape
10

A wick that stays dry, floods or leaks

Oil-wick fountain brush troubleshooting.

Flow

Loading...
11

History and honest limits

**Preston H. Clingan** of Florence, Colorado, assignor of one-half to John H. Todd of Cañon City, filed US 787,278 on 28 July 1904; it is dated 11 April 1905. His can is cylindrical with both ends contracted and threaded, so the cover fits either end; the thimble is soldered to an inward lip at the mouth; the wick is preferably a roll of burlap. He named oiling or polishing surfaces and cleaning windows among its uses. **Honest limits.** A jar with one threaded mouth stands in for his can. The notebook assumes a fully wetting wick and one pore size. Your weights are the result.

Mga Materyales

10

Mga Kinakailangang Kasangkapan

12

Mga design file

1

Kaugnay na Blueprint

Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

Wick Oiler

Wick Oiler

ni WoodyNO

TEKNOLOHIYA

51
0
0
0
0
0
Lubrication: The Film Does the Work, and More Grease Is Not More Lubrication

Lubrication: The Film Does the Work, and More Grease Is Not More Lubrication

ni MartinNO

Inhinyeriya

44
0
0
0
0
0
The Tube-in-the-Back Fountain Brush: Turn the Tube and the Jets Become a Soak

The Tube-in-the-Back Fountain Brush: Turn the Tube and the Jets Become a Soak

ni YourGrandmaIS

Mekanika

34
0
0
0
0
0

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...