SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Three-Strand Cotton Rope, Laid by Hand
Laid rope is three strands twisted together, each twist opposite the one inside it: the yarns one way, the strands the other, the rope the first way again. Each layer tries to untwist and is held by the next. Twist three strands of cotton twine hard, then let them lay themselves into rope.
The picture: a laid cotton rope, from the 1911 Encyclopaedia Britannica.
Katamtaman
Half a day
Mga Tagubilin
1
1
Lay out the strands
Lay out the strands
Run three equal strands of several twines each from a post to three hooks, half as long again as the rope you want (step 5).
Mga materyales para sa hakbang na ito:
Pisi ng Bulak60 mMga kailangang kasangkapan:
Tuwid na baras na kahoy
Klamp na hugis-C
Ruler
Gunting2
2
Twist each strand
Twist each strand
Hook one strand into the hand drill and twist it the same way as the twine was plied until it kinks when slackened. Clamp it, and do the other two the same.
Mga kailangang kasangkapan:
Barenang de-kamayKlamp na hugis-C3
3
Lay the rope
Lay the rope
Bring the three strand ends together and let go slowly from the far end: they twist round one another the opposite way. Guide the lay with a hand so it closes evenly.
Mga kailangang kasangkapan:
Klamp na hugis-C4
4
Whip the ends
Whip the ends
Bind each end tightly with a few turns of twine so it cannot unlay, and trim.
Mga materyales para sa hakbang na ito:
Pisi ng Bulak1 mMga kailangang kasangkapan:
Gunting5
5
Twine needed
Twine needed
Naglo-load ng Jupyter notebook…
Mga Materyales
1- 61 mPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.