SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Timber Beams Hewn Square from the Log
Before sawmills, beams for frames and machines were hewn square from the log with axes. Snap a chalk line, score notches down to it, knock out the wood between them (juggling), then hew the face smooth to the line with a broadaxe. Turn the log and do each side.
The picture: shipwrights with broadaxes hewing timbers for a ship, about 1915–1920 (Bain News Service, Library of Congress).
Katamtaman
A day per beam
Mga Tagubilin
1
1
Set the log up and mark
Set the log up and mark
Block the log off the ground so it cannot roll. Mark the beam's outline on both ends with the square and snap chalk lines along the log between them.
Mga materyales para sa hakbang na ito:
Troso1 pirasoMga kailangang kasangkapan:
Eskuwalang de-tokod
Tali ng tisa2
2
Score
Score
Stand on the log and chop notches every 30 cm or so, almost down to the line.
Mga kailangang kasangkapan:
Palakol
Hardhat3
3
Juggle
Juggle
Knock off the blocks of wood between the notches with the axe, leaving a rough face just short of the line.
Mga kailangang kasangkapan:
Palakol4
4
Hew to the line
Hew to the line
Hew the face smooth to the chalk line with the broadaxe, working from the bottom of the stem upward.
Mga kailangang kasangkapan:
Malapad na palakol5
5
Turn and repeat
Turn and repeat
Roll the log a quarter turn, snap new lines from the end marks, and hew the next face. Check the corners with the square; dress any high spots with the adze.
Mga kailangang kasangkapan:
Tali ng tisa
Eskuwalang de-tokod
Daras6
6
The biggest beam in a log
The biggest beam in a log
Naglo-load ng Jupyter notebook…
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.



