SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Two-Shaft Treadle Loom with a Split-Cane Reed
Woody

Nilikha ni

Woody

14. Oktubre 2026NO
3
0
0
0
0

Two-Shaft Treadle Loom with a Split-Cane Reed

On a treadle loom the feet open the shed, leaving both hands for the shuttle. A wooden frame carries the warp beam and the cloth beam; two shafts carry the heddles that lift alternate warp threads; treadles tied to the shafts work them; a batten with a reed, once made of split cane, spaces the warp and beats the weft in. The picture: a peasant handloom from Romania, old engraving.
Abantado
Two weeks

Mga Tagubilin

1

Frame

Saw two side frames of beech, each two posts joined top and bottom by mortised rails, and join them with cross rails front and back. Glue and peg every joint square.

Mga materyales para sa hakbang na ito:

Kahoy na beechKahoy na beech6 piraso
Mga tarugong matigas na kahoyMga tarugong matigas na kahoy16 piraso
Pandikit na balat ng hayopPandikit na balat ng hayop100 g

Mga kailangang kasangkapan:

Lagaring PangkamayLagaring Pangkamay
Lagaring may gulugodLagaring may gulugod
Set ng paitSet ng pait
Kahoy na PamukpokKahoy na Pamukpok
Barenang de-kamayBarenang de-kamay
Eskuwalang de-tokodEskuwalang de-tokod
Dobleng kalderoDobleng kaldero
2

Beams and ratchets

Shave two round beams from shafts for the warp beam at the back and the cloth beam at the front, with round journals resting in notches in the side frames. Cut a toothed wooden ratchet wheel on one end of each and a pawl on the frame to hold the tension.

Mga materyales para sa hakbang na ito:

Tuwid na baras na kahoyTuwid na baras na kahoy2 piraso
Kahoy na beechKahoy na beech1 piraso

Mga kailangang kasangkapan:

Kutsilyong HinihilaKutsilyong Hinihila
Katam na dalawa ang hawakanKatam na dalawa ang hawakan
Lagaring PangkamayLagaring Pangkamay
Set ng paitSet ng pait
3

Shafts and heddles

Make two shafts, each a pair of light bars. Tie cotton string heddles between the bars, each with a small eye in the middle, all the same length (step 6). Hang both shafts from cords over a roller on top of the frame, so one rises as the other sinks.

Mga materyales para sa hakbang na ito:

Tuwid na baras na kahoyTuwid na baras na kahoy5 piraso
Sinulid na BulakSinulid na Bulak200 m
LubidLubid6 metro

Mga kailangang kasangkapan:

Kutsilyong SloydKutsilyong Sloyd
GuntingGunting
RulerRuler
4

Reed and batten

Shave split cane into thin, even dents. Bind them upright between two pairs of wooden ribs with cotton thread wound between each dent, spacing them evenly. Mount the reed in a batten hung from the top of the frame so it swings to beat.

Mga materyales para sa hakbang na ito:

Hinating kawayanHinating kawayan30 m
Sinulid na BulakSinulid na Bulak100 m
Kahoy na beechKahoy na beech1 piraso

Mga kailangang kasangkapan:

Kutsilyong SloydKutsilyong Sloyd
Lagaring PangkamayLagaring Pangkamay
Barenang de-kamayBarenang de-kamay
5

Treadles

Hinge two treadle bars to a rod at the back of the floor frame. Tie each to the bottom of one shaft, so pressing a treadle pulls its shaft down and lifts the other.

Mga materyales para sa hakbang na ito:

Kahoy na beechKahoy na beech1 piraso
Tuwid na baras na kahoyTuwid na baras na kahoy1 piraso
LubidLubid4 metro

Mga kailangang kasangkapan:

Lagaring PangkamayLagaring Pangkamay
Barenang de-kamayBarenang de-kamay
Kutsilyong SloydKutsilyong Sloyd
6

Reed and heddles

Naglo-load ng Jupyter notebook…

Mga Materyales

7

Mga Kinakailangang Kasangkapan

12

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...