Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Uninked Ribbon Fabric: Nylon with a Crimped Filler, Relaxed in Soap (Thompson, US 2,918,160, 1959)
Nylon ribbons wear well but hold little ink; cotton holds more but frays under the type. Thompson wove nylon with a crimped filler held taut; relaxed after weaving, the crimped filaments spring apart into tiny pockets that store ink, while the surface stays flat.
Result: a thin nylon ribbon fabric, about 167 x 100 per inch, that held ink for about twice as many lines.
Source: Thompson, US 2,918,160 (1959). Picture drawn by Youblob.
Abantado
Factory process
Mga Tagubilin
1
1
Crimp the filler yarn
Crimp the filler yarn
Give 40-denier, 34-filament nylon (5 turns twist) heat-set crimps, about 64 per inch. Thompson points to US 2,575,838 for the crimping. Ours: Nylon Thread by kind.
Mga materyales para sa hakbang na ito:
Sinulid na naylon1 as requiredMga kailangang kasangkapan:
Makinang pangkulot ng sinulid2
2
Weave it under tension
Weave it under tension
Plain weave at loom width: warp 40-denier, 34-filament nylon, 7 turns twist, about 148 per inch; crimped filler 100 per inch, kept stretched so the crimps are held out while weaving. Heavy duty: 70 denier.
Mga materyales para sa hakbang na ito:
Sinulid na naylon1 as requiredMga kailangang kasangkapan:
Makinang panghabi3
3
Relax in warm soap and dry loose
Relax in warm soap and dry loose
Soak the fabric in a neutral soap solution at about 90 °F, then dry it without a frame. The crimps come back and open pockets among the filaments; the surface must stay flat.
Mga kailangang kasangkapan:
Sabon4
4
Cut into ribbons, sealing the edges
Cut into ribbons, sealing the edges
Scour, then cut into ribbon widths with the crimped yarn running across the ribbon. A heated cutter seals the edges. Finished count about 167 x 100; a filler of 95-110 per inch works.
Mga kailangang kasangkapan:
Mainit na pamutol ng ribbonMga Materyales
1- 2 as requiredPlaceholder
Mga Kinakailangang Kasangkapan
4- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.