Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Uninked Ribbon Fabric: Undyed Raw Silk Weighted in Stannic Chloride (Beall, US 1,263,019, 1918)
Silk makes the thinnest, lint-free typewriter ribbon and the sharpest type. Beall used undyed raw silk, which soaks up more ink than dyed silk, and weighted it in a tin solution so the light ribbon gains body, wears longer and runs through the guides without wrinkling.
Result: a thin, close silk ribbon fabric, ready for inking.
Source: Beall, US 1,263,019 (1918). Not given: weave count, width, strength of the tin solution, soaking time. Picture drawn by Youblob.
Katamtaman
1 day
Mga Tagubilin
1
1
Weave undyed raw silk thin and close
Weave undyed raw silk thin and close
Weave pure undyed raw silk into a thin, close web at ribbon width. Weave count and width: not given.
Mga materyales para sa hakbang na ito:
Sinulid na sutla1 as requiredMga kailangang kasangkapan:
Makinang panghabi2
2
Weight it in a tin solution
Weight it in a tin solution
Immerse the woven ribbon in a solution of stannic chloride. It adds weight and wear, at a slight cost in ink taken up. Beall allows doing this to the silk before weaving. Strength and time: not given.
Mga materyales para sa hakbang na ito:
Stannic chloride1 as requiredMga kailangang kasangkapan:
Tubig
Patag na bandehang pampatuyo3
3
Dry it smooth
Dry it smooth
Dry the ribbon flat: both faces should be smooth and free from lint. It is then ready to be impregnated with ribbon ink.
Mga kailangang kasangkapan:
Patag na bandehang pampatuyoMga Materyales
2- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.