Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Veneer Hammer: an Iron Strip Set in a Wooden Head (Work, 1889)
The veneering hammer does not strike: it is drawn over glued veneer like a squeegee, pressing it down. David Adamson (1889) says it is hardly worth buying, as anyone can make one: a strip of iron 3 to 6 inches long set in a wooden head with a handle, its edge projecting, straight, and smoothly rounded.
Shape and size do not matter much; it must be strong, the iron thick enough not to bend, and the edge smooth.
Source: D. Adamson, 'Practical Veneering', Work, 5 October 1889, p. 453. Picture: his Fig. 1.
Baguhan
Unknown
Mga Tagubilin
1
1
Read Adamson
Read Adamson
"A strip of iron of, say, from 3 in. to 6 in. long and of any convenient width is firmly fixed between two pieces of wood, or in a groove cut in one piece to form the head. In this a handle is inserted. The precise shape and size of any part are quite immaterial, the principal points to be observed being strength and convenience."
2
2
Cut the iron strip
Cut the iron strip
Cut a strip of iron 3 to 6 in. long and of any convenient width, thick enough not to bend when the hammer is pressed hard. Its thickness is not given (unknown). Ours: cut from iron plate with a hacksaw.
Mga materyales para sa hakbang na ito:
Plato na bakal1 strip 3-6 in.Mga kailangang kasangkapan:
Lagaring Pang-metal
Hindi alam na sukat3
3
Make the head
Make the head
Cut a groove in a block of wood and fix the strip firmly in it, with its edge projecting beyond the wood (or fix it between two pieces of wood). Fit a handle into the head. The wood, and how the strip and handle are fixed, are not given (unknown). Ours: a hardwood block, the groove sawn.
Mga materyales para sa hakbang na ito:
Tipak ng Matigas na Kahoy1 head
Hawakan ng Kasangkapan1 piraso
Hindi alam na konektor1 pirasoMga kailangang kasangkapan:
Lagaring may gulugod4
4
Round the edge
Round the edge
File the projecting iron edge straight, smooth and rounded so it passes freely over the veneer, and slightly round off its lower corners so they do not damage the veneer. The smoother the edge, the easier the tool is to use.
Mga kailangang kasangkapan:
Kikil (Kikil na Pangkamay)Mga Materyales
4- 1 strip 3-6 in.Placeholder
- Placeholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
4- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.