Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay.
Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast.
Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
Baguhan
Unknown
Mga Tagubilin
1
1
Make the top
Make the top
Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.
Mga materyales para sa hakbang na ito:
Tablang kahoy1 two-inch plank, about 30 x 20 in
Tabla1 raised edge, 2 in high
Pakong Bakal1 pirasoMga kailangang kasangkapan:
Lagaring Pangkamay
Martilyo2
2
Pour the plaster
Pour the plaster
Fill the trough with plaster and let it harden.
Mga materyales para sa hakbang na ito:
Yesong Plaster of Paris1 pirasoMga kailangang kasangkapan:
Martilyo3
3
Fit the post and wire
Fit the post and wire
Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.
Mga materyales para sa hakbang na ito:
Hindi kilalang materyal1 upright post, material not given
Manipis na alambreng tanso-dilaw1 fine brass wirePakong Bakal1 pirasoMga kailangang kasangkapan:
MartilyoLagaring PangkamayMga Materyales
6- 1 two-inch plank, about 30 x 20 inPlaceholder
- 1 raised edge, 2 in highPlaceholder
- 2 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 upright post, material not givenPlaceholder
- 1 fine brass wirePlaceholder
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.